|
99 and newer Volvo S80 Control Unit ABS / STC 96-97 Volvo 850 Control Unit TRACS 2 / 4WD, Control Unit ABS 98-00 Volvo C70, S70 and V70 Control Unit TRACS 2 / 4WD, Control Unit ABS Also known as ABS Computer, Controller and Module Turbo Model ABS TRACS Controller Removal Instructions All the information and images contained in this website are the property of vicrocha@earthlink.net Copyright© 2003 Updated 1/11/05 |
|||||||
|
|
repair rebuilding rebuilt used for sale OEM troubleshooting instructions instruction help |
||||||
|
|
4.5 Release the valve pictured in the circle. Pull it straight up to release and set it aside. |
||||||
|
|
5. Disconnect the fresh air intake hose from the front and where it attaches to the bottom air cleaner assembly. 6. Spray some WD-40 in the retainer clips of the bottom air cleaner assembly. With a quick motion, pull the air cleaner assy. straight up to release it from the retainer clips. 7. Remove the bottom air cleaner assembly, lift first the side next to the air intake tubes and release the other side from the fender wall. |
||||||
|
|
8. After the air cleaner assembly is removed and the turbo intake hose are moved out of the way, you will be able to gain access to the connectors of the ABS unit and to the screws. |
||||||
|
|
8. This is the best way to position your hands to remove the ABS unit screws. 9. With your left hand hold the tool tightly against the screws and with the right hand operate the ratchet handle. 10. Go back and continue with the removal of the ABS unit. |
||||||
|
General Information |
|||||||
