Reed Making Tools
1. Utility Mandrel .....................$ 16.52 ea.
           

Pencil,aluminium tube handle, 3-5/8 x 7/16 w/pocket clip. Interchangeable brass holding/formings tips

2. Double Ender Mandrel.........$ 16.52 ea.
Aluminium tube handle, 2-5/16 x 7/16 w/brass holding tip and forming tip at opposite ends
3. Pin Vise Mandrel................ $ 16.52 ea.
3A. Pin Vise Mandrel with (1) one additional Brass forming tip...........$ 19.52
Hollow plastic handle w/end cap to store holding tip. Handle,holding and forming tips and Exacto blade included.
3B. Pin Vise Mandrel with (2) two additional Brass forming tips...........$ 22.52
3C. Pin Vise Mandrel with (1) one additional Stainless Steel forming tip.............$ 20.52
4. Electric Hot Mandrel............$ 37.95 ea.
Brass or Stainless steel forming tip adapted to 40 Watt solid state heating iron (Instructions and safety precautions included)
5A. Penlight Mandrel..................$ 17.95 ea.
Translucent Mandrel adapted to penlight illuminates reed blades to expose shadows in orchestra pit. (Includes 5B translucent plaque)
5B. Reed Plaque........................$ 4.95 ea.
Translucent reed plaque

6A. 4-in1 Reamer/Mandrel Kit..$ 69.95

 

Hollow 1/4 " Chucked Aluminum handle w/brass end cap to stow brass holding and forming tips and Exacto blade. Includes the tapered spiral reamer
6B. Spiral Reamer....................$ 49.00 ea.

Reamer tip only

Multi-fluted reamer ground from drill stock with the same rate of taper as the old popular single-flute reamer tip, but it cuts twice as fast, so take it slow. Clean and check tube fit to bocal frequently to avoid over-reaming.

6C. Reamer with Handle...........$ 56.52 ea.
6D. Chucked Handle Only..........$ 8.27ea.

7A. Aluminum Drying Board

(1) w/ Brass Mandrel Tips.......$61.95

Brass Mandrel Tip Combinations

 

 

Hand finished aluminum block, 6-1 /2 x 1-1/2 Holds 12 mandrel tips. Includes any combination of brass holding or forming tips or any combination of brass and stainless steel forming tips

 

     (2) w/ Stainless Steel Tips.......$ 73.95 ea.
           

7B. Brass Mandrel Tips...

      (1) Brass Forming Mandrel Tips (Long).......$ 3.00 ea.

      (2) Brass Holding Tips (Short).......$ 3.00 ea.

 7B1 (Minimum order 3) .......$ 9.00

 7B2 (Minimum order 3).......$ 9.00

           

 

Brass Holding Tips (Short) :1/4" x 2" tapered

Brass Forming Mandrel Tips (Long) : 1/4" x 2- 9/16" tapered

7B Brass Mandrel tips (Six Long or Six Short).......$18.00
Six Brass Tips

7B1 Long

One Dzn $36.00

Two Dzn $70.00

 

7B2 Short

One Dzn $36.00

Two Dzn $70.00

7C. Stainless Steel Mandrel Tips (Long Forming Only) ...$ 4.00 ea.

Minimum Order 2 ...$ 8.00

           One Dozen $ 48.00

           Two Dozen $ 92.00

Stainless Steel Mandrel Tips: 1/4" x 2-9/16" tapered

8. Swiss Grobet File (Coarse) ...$ 16.50 ea.

4 inch warding file 5 5/8" overall length

Chrome-steel precision file "0" for roughing in

8A Swiss Grobet File (Fine) .....$ 17.50 ea.

4 inch finishing file 5 5/8" overall length

Chrome-steel precision file "2" for finishing and beveling
9. OPEN

10. Dial Indicator and Set Up: Don Christlieb's later revision to his original design. Federal Dial Indicator with jeweled "Miracle Movement", fixed tapered feeler arm and aluminum base stand. Inches or Metric. Availability subject to supplies on hand. Inquire before ordering

Dial and Set Up (Inches): 310.00 (Allow six weeks for delivery)

Dial and Set Up (Metric):  $ 310.00 (Allow six Weeks for delivery)

Note: John Campbell's Dial Indicator and Set Up (Mitituyo) previously listed at $ 225.00 is available in inches only.* Please inquire before ordering. Supply is limited.

 

* Contact Mr. Campbell directly for the metric model  (bssnist@hotmail.com).

 

 

Availability subject to supplies on hand. Inquire before ordering.
 
CANE
BOOKS
BOCALS
MUSIC
HOME
CATALOG UPDATE

 

Contact Information e-mail

Founders Logo Cane Pg Catalog Update Page