CP/M-68K Simulator

This is a work in progress but might be good enough for others to play with.

This is built on the framework provided by the Musashi MC68000 simulator. In addition to simulating a MC68000 the only hardware simulated is a console port and the disk system. The code, and especially the console I/O assumes it is running under Linux.

To build the simulator for CP/M-68K you will need a copy of the code above and this. The file cpmsim.c is the simulator and used the example.c program as a skeleton on which to build. Build using the makefile supplied along with cpmsim.c. This should create an executable named "cpmsim".


The console port is a very simple simulation of a serial port. In this case a much reduced 6850 ACIA. While I have included code for interrupts, I haven't tested them. Standard input and output are switched to raw mode so that things like control-C can be handled by CP/M. The settings are restored on exit but if the signal handler doesn't get called, this will not happen.


The simulator provides for up to 16 simulated disk systems. You can mount a file as a simulated CP/M disk with the command line option of "-a filename" where "a" can be anything between "a" and "p". The simulator determines the size of the attached files when mounted and will not attempt to read or write beyond that limit.

Drive C is attached to the file "diskc.cpm.fs" which is a 16MB file system and is included in this package. The image included contains a complete working CP/M-68K system. 16MB is much less than the 512MB maximum for CP/M-68K but seemed like a workable size. Big enough to hold all the tools and several projects. If you need more...

Drive A simulates a plain vanilla 8" SS SD drive. This is handy for moving files into and out of the simulation using cpmtools. This is the default for cpmtools.

I also included a 800K drive B which is what my CP/M-68K system used.

Although it isn't much faster, drive M is a 16MB ram disk. I measured a long compile to be about twice as fast when run from the ram disk. Probably not worth the effort.

Other drives of different sizes can be added by including the appropriate changes in the BIOS. Creating a new file system image is as easy as using the Unix tool "dd".

If by some chance you run two instances of the simulator at the same time that mount the same file system images, only the first will be able to write to them. The second will inform you when an image is mounted read only.


There are two options for booting CP/M-68K. From binary images or from the drive C file system.

Binary images

The CP/M-68K distribution provides for a way to bring it up without the tools included. An image of the BDOS in S-record format is included. By loading this along with a rudimentory BIOS at a fixed address you can get things started. This is how I started here. By including the option "-s" on the commaned line the simulator will load the BDOS from "cpm400.bin" and the BIOS from "simbios.bin".

While most of the programs in user area 0 of the drive C file system were relocated using this boot option, some were not. This will result in those programs not loading. If this happens you will have to dig up the relocatable version. I don't expect this to be a big problem because there is really no reason to boot this way.

Drive C

This replicates the normal multi-stage boot process. The CP/M loader is located in the system portion of the drive C file system and is loaded into memory and executed. It locates CPM.SYS on the file system and loads that into memory.

You can make changes to CP/M using the available tools (C compiler, assembler, linker) creating a new CPM.SYS. Just be sure to keep backups. The source for the provided system is in user area 2.


Ending the simulation is as easy as typing "bbye" which signals the simulator to wrap things up. The terminal is set to raw mode so ^C doesn't work. That gets passed through so that CP/M-68K can handle it.


I have included a few things that are not a part of the standard distribution:

User Contents
14 uemacs V3.6.1
13 uemacs V?
11 CC
10 make
7 Another version of make
5 loader and regular BIOS, etc
4 CP/M loader lib source
2 C libraries
1 C include files


Ed is usable as a text editor but that isn't saying much. A screen editor is much betters and micro-emacs fits the bill. Two versions are provided. The first is of unknown vintage as I can't find any indication of a version number. This is named "emacs". The second is built from the version 3.6.1 sources and is named "uemacs". The 3.6.1 version has key bindings more like what I am used to. Both use ANSI escape codes and work well for me in an xterm.


Compiling C programs using the provided submit files, which can't be nested, is tedious at best. This program makes it more like the usual process in Unix. Compiling something like micro-emacs as easy as "cc *.c -o emacs.rel". This program comes in two parts. The first part is cc.68k and it loads the second part into the high part of the TPA. It then changes the TPA size before starting that program. This lets CC load and run other programs that have been converted from relocatable form using reloc.


The version in user 0 just creates a submit file and is built from the source in user area 7. I finally located this source which was hiding in a .arc file. This code uses one of the attribute bits to test if a file has changed. Not nearly as good as a real time stamp but usable. The source in user 10 is for something better although it requires more work to port from its MSDOS origins.


Locating a file somewhere in the user areas can be a pain so this program lets you specify a filename with optional wildcards and it prints out a list of aveerything that matches.


For those times when you need to burn EPROMS and need to split a binary into the even and odd parts. Checks for a CP/M-68K executable file header and skips it if found.

Not all of the files from the CP/M-68K distribution are here. Just what made it over while I was working on this.

Changing things

Besides changes to the BIOS you can also change CP/M-68K. One thing I did long ago was add improved command line editing. I had a chance to use a CPM+ system once and liked that a lot. My new readline function is part of the included CPMLIB. Souce is in newcon.c with documentation in newcon.doc. This function is available via the BDOS call as well.

Other modules can be swapped out of CPMLIB using ar68. Changes are a lot easier now with the original source code available.

If you break it just dig out your backup of the disk C image and start again.

The Code

CP/M-68K Simulator

Unzip the Musashi source first and run it through dos2unix or it will not compile. At least it wouldn't for me. Then unzip my file and be sure to use the m68kconf.h file in it. Then run make.

2017 Addenda

I received a report of segmentation violations when built using V3.4 of the Mushashi source. (I used 3.3) Upon investigation I found a thinly documented change to the initialization code. The README doesn't say anything but the example added some new code. So if you use V3.4 you need to add this just before the call to m68k_pulse_reset() in cpmsim.c: