My Home Page

Linux on the Versa LX AGP

Preface

This is a survey about Linux related hardware features of the Versa LX AGP. I don't try to explain the usual installation details (for instance, which partitions I have made).

For more information and other Linux links, visit my home page.

Quintin Womack <qwomack@earthlink.net>

Installation

On my Versa LX AGP I have installed the SuSE 7.2 Linux distribution.

General Hardware Data

General system information:
Linux speed 2.4.4-4GB #1 Fri May 18 14:11:12 GMT 2001 i686 unknown

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 6
model name	: Mobile Pentium II
stepping	: 10
cpu MHz		: 399.673
cache size	: 256 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips	: 797.90
    
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/hda3              3036184   2318164    718020  77% /
shmfs                   188844         0    188844   0% /dev/shm
    

Disk /dev/hda: 255 heads, 63 sectors, 789 cylinders
Units = cylinders of 16065 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/hda1   *         1       394   3164773+   7  HPFS/NTFS
/dev/hda2           395       411    136552+  82  Linux swap
/dev/hda3           412       789   3036285   83  Linux
    

Hard Disk


/dev/hda:

 Model=IBM-DADA-26480, FwRev=AD6OA42A, SerialNo=ZC2ZCHL0493
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=13424/15/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=DualPortCache, BuffSize=460kB, MaxMultSect=16, MultSect=16
 CurCHS=13424/15/63, CurSects=12685680, LBA=yes, LBAsects=12685680
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2 
 Drive Supports : ATA/ATAPI-4 T13 1153D revision 17 : ATA-1 ATA-2 ATA-3 ATA-4 
 Kernel Drive Geometry LogicalCHS=789/255/63 PhysicalCHS=13424/15/63
    

PCMCIA

Output of probe:

PCI bridge probe: Ricoh RL5C478 found, 2 sockets. 
    

Graphic-Chip

Output of SuperProbe:


SuperProbe Version 2.23 (2000 November 28)
	(c) Copyright 1993,1994 by David Wexelblat <dwex@xfree86.org>
	(c) Copyright 1994-1998 by The XFree86 Project, Inc

	This work is derived from the 'vgadoc2.zip' and
	'vgadoc3.zip' documentation packages produced by Finn
	Thoegersen, and released with all appropriate permissions
	having been obtained.  Additional information obtained from
	'Programmer's Guide to the EGA and VGA, 2nd ed', by Richard
	Ferraro, and from manufacturer's data books

Bug reports are welcome, and should be sent to XFree86@XFree86.org.
In particular, reports of chipsets that this program fails to
correctly detect are appreciated.

Before submitting a report, please make sure that you have the
latest version of SuperProbe (see http://www.xfree86.org/FAQ).


First video: Super-VGA
	Chipset: ATI 264LT Pro (3D Rage LT Pro) (Port Probed)
	Memory:  8192 Kbytes
	RAMDAC:  ATI Mach64 integrated 15/16/24/32-bit DAC w/clock
		 (with 8-bit wide lookup tables)
		 (programmable for 6/8-bit wide lookup tables)
	Attached graphics coprocessor:
		Chipset: ATI Mach64
		Memory:  8192 Kbytes
    

Output of xviddetect:


    

Sound

Output of cat /dev/sndstat:


    

Infrared Port - IrDA(TM)

FIR


    

SIR

ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at port 0x02f8 (irq = 3) is a 16550A
    

Floppydrive

Floppy drive(s): fd0 is 1.44M
    

Survey PCI Devices

Output from lspci:

00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
00:03.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 03)
00:03.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 03)
00:04.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc)
02:00.0 Non-VGA unclassified device: Digital Equipment Corporation DECchip 21142/43
    

Survey PnP Devices

Output from pnpdump:

# $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $
# Release isapnptools-1.21 (library isapnptools-1.21)
# 
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
# 
# For details of the output file format, see isapnp.conf(5)
# 
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
# 
# Compiler flags:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
# (for   library:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR)
# 
# Trying port address 0283
# Trying port address 028b
# Trying port address 0293
# Trying port address 029b
# Trying port address 02a3
# Trying port address 02ab
# Trying port address 02b3
# Trying port address 02bb
# Trying port address 02c3
# Trying port address 02cb
# Trying port address 02d3
# Trying port address 02db
# Trying port address 02e3
# Trying port address 02eb
# Trying port address 02f3
# Trying port address 0303
# Trying port address 030b
# Trying port address 0313
# Trying port address 031b
# Trying port address 0323
# Trying port address 032b
# Trying port address 0333
# Trying port address 033b
# Trying port address 0343
# Trying port address 034b
# Trying port address 0353
# Trying port address 035b
# Trying port address 0363
# Trying port address 036b
# Trying port address 0373
# Trying port address 037b
# Trying port address 0383
# Trying port address 038b
# Trying port address 0393
# Trying port address 039b
# Trying port address 03a3
# Trying port address 03ab
# Trying port address 03b3
# Trying port address 03bb
# Trying port address 03e3
# Trying port address 03eb
# Trying port address 03f3
# No boards found
    

Survey RS232

Output from setserial:

/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal skip_test

/dev/ttyS1, Line 1, UART: 16550A, Port: 0x02f8, IRQ: 3
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal skip_test

/dev/ttyS2, Line 2, UART: unknown, Port: 0x03e8, IRQ: 4
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal skip_test

/dev/ttyS3, Line 3, UART: unknown, Port: 0x02e8, IRQ: 3
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal

/dev/ttyS4, Line 4, UART: unknown, Port: 0x01a0, IRQ: 2
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal Fourport

/dev/ttyS5, Line 5, UART: unknown, Port: 0x01a8, IRQ: 2
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal Fourport

/dev/ttyS6, Line 6, UART: unknown, Port: 0x01b0, IRQ: 2
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal Fourport

/dev/ttyS7, Line 7, UART: unknown, Port: 0x01b8, IRQ: 2
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal Fourport

/dev/ttyS8, Line 8, UART: unknown, Port: 0x02a0, IRQ: 5
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal Fourport

/dev/ttyS9, Line 9, UART: unknown, Port: 0x02a8, IRQ: 5
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal Fourport  
    

Disclaimer

This document has nothing to do with NEC, they don't even know it exists. There is no guarantee that the information on this page is accurate, please don't hold me responsible if your experience is different from the information here.

Credits


This report was generated by lanoche v0.6 Fri Nov 23 20:25:07 EST 2001.

The latest version of lanoche is available at MobiliX - Software.



Return Home