Hello!   Welcome to  the download  area for  demonstration
copies  of Computronics  PEEK software  for Unix  systems.
Peek is a  utility that is used to  allow authorized users
to assist other users and  to provide training.  It allows
you to  view a  user's terminal,  telnet, and  xterm style
sessions, and to type on the behalf of a monitored user.

To use Peek you will need three files:

* This  README file,  which you can  download as  an ASCII
  file as /pub/peek/README

* The Peek manual, which is available in text form or as a
  ready to print  Postscript file, or  as  an Acrobat  PDF
  file. If  you  have  the Acrobat  Reader, use  the  file
  /pub/peek/peek_manual.pdf If you can prefer a Postscript
  file, use the file: /pub/peek/peek_manual.ps If you need
  a text version of  the  manual, download the ASCII  file
  /pub/peek/peek_manual.txt

* You will  also  need  the software  itself.  Look  for a
  directory named with the Unix system you  utilize (hpux,
  aix, sco, etc).   Then, in  this directory will be  file
  named:  peekxxx_platform.cpio.Z   In this name, "xxx" is
  the  version number, and "platform"  is the desired Unix
  platform.  Thus to  download  version 1.9n  of  Peek for
  HP/UX you will download the BINARY file:
  peek109n_hpux.cpio.Z

Finally,  before  installing  the software,  you  need  to
execute the command on your Unix system:

zcat peekxxx_platform.cpio.Z | cpio -icmvdu

(Use the proper version and platform, as discussed above).
At this time, you will have a directory called peekxxx and
you can install it as documented in the Peek manual.

Questions?  Contact Computronics at:
"support@computronics.com" or  phone  630/941-7767 or  fax
630/941-7714.  Note that you will need to get a setup code
to enable the software.  Contact Computronics for the code
that you need when you get to the appropriate installation
step.
 
Thank you!