Here are some examples of renderings Norwood Designs created for our customers. Most of the renderings were done as part of our product development. Click on each picture to view a larger image.
		These two images were created to showcase the level of realism that is possible. For most projects a simpler rendering is sufficient.
This Image is designed to show the components as well as the energy flow in this solar energy device. This image was created for David Wells of Northside, Inc. He can be reached via e-mail at laseraxe@erols.com.
	Compare the images to the left. The right side of the image was created to visually demonstrate the form and function of this caging. The photo on the left side of the image shows the actual caging as produced. The rendering allowed the manufacturer gather opinions and concerns from perspective customers prior to manufacturing the first unit.
The Drawing of the rear panel and the rendering of the Eagle-T fast transportable data recorder were used in proposals for this re-configurable next generation instrument designed by Tri-Plex, Inc. http://www.tri-plex.com.
	This laser etching system was rendered to show component layout and ergonometric considerations. The image was used on proposals for this innovative instrument designed by Potomac Photonics, Inc. http://www.potomac-laser.com.
	These images were used to show inexpensive arrays of solar collectors. The image on the right shows a concept for an evacuated tube solar collector with automatically adjusted solar concentrating mirrors mounted on a roof. The image on the left shows a solar concentrator in which the solar collectors move and the concentrating mirrors are stationary These images were created for David Wells of Northside, Inc. He can be reached via e-mail at laseraxe@erols.com.
	Design Tech International needed to show their successful product designed for use in American cars as it would appear with a European connector. The inset is the "wire frame" that is used generate the rendering. Visit: http://www.designtech-intl.com.
	This rendering was developed for HIAC/ROYCO, a division of Pacific Scientific Co. The Automatic Bottle Sampler's design was refined as indicated by studies of the rendering. Compare the rendering to the left to the photo on the right.
Mark Norwood - norwood@earthlink.net Norwood Designs P.O. Box 69 Butler, Maryland 21023 last updated 8/22/2003 ©Copyright, Norwood Designs 1998, 1999, 2000, 2001, 2002, 2003 all rights reserved. If you wish to use any of the images on this web site for private or public use, you must contact Mark Norwood of Norwood Designs first. All logos and trademarks are the property of their respective holders