|
Yaesu VX5R Commands |
||||
| BAND (SET) AR | 1 (TN) FRQ | 2 (CD) TAG | 3 (DT) VLT | |
| Key | Change frequency band | Frequency digit 1 | Frequency digit 2 | Frequency digit 3 |
| FW - Key | Enter SET (menu)/mode | Activate CTCSS / DCS tone | Select CCTCSS tone or DCS code | Activate DTMF autodialer function |
| Hold Key | Activate ARTS feature | Enable display of Sub- band frequency | Select freq or Alpha-Tag during memory operation | Display battery type and voltage |
| HM (RV) EMG | 4 (MG) DSP | 5 (AP) ICO | 6 (RP) WX | |
| Key | Reverse TX / RX frequencies on repeater | Frequency digit 4 | Frequency digit 5 | Frequency digit 6 |
| FW - Key | Switch to the HOME channel | Activate the memory group mode | Activate auto power-off feature | Selects + or - repeater offset |
| Hold Key | Activate the emergency feature | Switches display between large and small characters | Switches display between alpha-numeric & icon formats | Displays operating and TXing time since radio last turned on |
| TX (PO) LOCK | 7 (ST) TMP | 8 (BRO) | 9 (BP) ALT | |
| Key | Select desired TX power level | Frequency digit 7 | Frequency digit 8 | Frequency digit 9 |
| FW - Key | Activate the key lockout feature | Select Synthesizer steps | None | Turn keypad beeper on / off |
| Hold Key | None | Display temperature inside radio | Displays barometric pressure | Displays the current altitude |
| PTT | MON | Lamp | ||
| Key | Transmit | Disable squelch OR Enable tone burst | Illuminate LED for 5 seconds | |
| FW - Key | Temporary High Power transmit | Reverse Repeat | Activate the spectrum analyzer | |
| Hold Key | Transmit | None | Illuminate keypad until you press the key again | |
| MR (SKP) SC | 0 (SQ) WX | VFO (DW) SC | ||
| Key | Switch to Memory mode | Frequency digit 0 | Select the VFO mode | |
| FW - Key | Designate memory to be skipped when scanning | Adjust the squelch threshold | Activate the dual watch | |
| Hold Key | Initiate memory channel scanning | Recall the weather broadcasting channels | Activate VFO scanning | |