Matrix Machine Tool Modification Corp.
F4 Phantom Air Extendable Nose Strut.
1:6.8 Scale F16 Gear
F4 Phantom Air Extendable Nose Strut.
1:7 Scale F15 Gear
Mig29 Gear
1:6 Scale F16 Landing gear
1:5.5 Scale A6 Intruder Landing Gear
1:9 Scale SU-27 Flanker Gear
1:8 Scale SU35 Gear
1:10 Scale F14 Gear & Wing Sweep.
1:10 Scale A7 Landing Gear
Customer Photos
Limited Warranty
Disclaimer, Precautions & Warnings

$249 for BVM F4 compatible nose gear.
 
$249 for Skymaster or any 5/16 (.315") (or 8mm) nose gear post.
 
$289 for Strut including 2 nose tires and axel.

f4nosed.jpg
BVM compatible nose strut in the " on the ground" position.

smf4.jpg
This is The Skymaster compatible in the extended position.

Install this strut on your F4 Phantom and let your jet set level on the ground like the real thing. Ready to take off, just apply air to the strut and it will jack up the nose 1.73"  for a slightly  "NOSE HI"  take off attitude, just like the real thing. Ready to land? set up your valve to vent the air out of the strut and the nose will sit down again on landing.
 
This is a must have feature for your F4 Phantom.

f4noseu.jpg

From Steve Unze:

I competed in the "Gunsmoke" scale masters regional in Mesa, AZ last weekend with my F-4. I was able to compete in the event and placed 1st in expert division. It was a very close competition and were it not for the good static score I received in part because of your strut, I would not have won. Thanks for the fine work! Keep it up.

Inovation by Design - Excellence in Performance.

For information or to order, email us here: matrixmt@earthlink.net