|
I have been running all new brake lines the last few weeks. I ran 3/16" line. The hardest part was finding the metric fittings
for the master cylinder. The fittings are M12-1.0 and M12-1.5 and I found that a company called Brakequip makes them.
Here are some pictures of the progress:
I made this trim plate for the proportioning valve.
I mounted the proportioning valve on the subframe. The knob sticks through the floor, just in front of the driver's seat.
You can only see it if you are looking for it.
Here are a couple of shots of the lines leaving the master cylinder.
Here are random shots of the line routing. I am using Russell 3/16" stainless steel clamps.
|
