QB wings in their stand in background; the big box on my lift cart in front.

After pressure testing the wing tanks with the floats, I started on the pitot tube

I bought a Gretz mount to go along with the Dynon Pitot/AoA heated tube. Started with a brace.

Bought a tube bender to bend the aluminum lines to avoid the aileron push tube

At Oshkosh I bought an AOA system from InAir. All layed out. I'm putting it in the right wing

The crate that came with the QB wings is open. The Flaps are visible and the Ailerons are underneath

I kept getting disoriented figuring out how to bend the wires on the fuel floats, so I mounted them

Initial fitting of the mount and tube. Had to tap my own screw holes in pitot's brass - tough!

Bought a tubing kit from SafeAir and added another tube run with their snap bushings

Also bought my Auto Pilot Servos at Oshkosh from Trio