ISS Screen Saver Information:
(made available by Boeing)


The ISS screen saver is available for free download. The slideshow sequence
builds up the station, beginning with Flight 1A/R and ending with its completion.

The slides were built at 640X480 to support users with 14" or 15" monitors. 

This screen saver will run on Windows 98/95/NT and Macintosh operating
systems. DO NOT install this product if you are running Windows 3.1/3.11

In order for this screen saver to operate properly, you must have 4MB of
available memory for the screen saver. 2MB of hard disk space for the files, and
be able to display 256 colors on your monitor (16 bit reccomended). Do not try
to run this product on computers with less then 8 MB of memory.

This product is intended for promotional use, and is given to you at NO
CHARGE and in "AS IS" condition. If for any reason you are having diffuculty
using this product after installation please follow the directions for uninstalling
the screen saver.

This product is not intended to run over networks.

Other screen saver programs such as Afterdark® may interfere with the
operation of the ISS screen saver.

The PC version has a "password" option that can be enabled through the
windows screen saver control panel.

Macintosh Version - ISS_INSTALL.sit (2.3 Mb). After downloading a ".sit" file
on a Macintosh, use StuffIt Expander® by Aladdin Systems, Inc.,
http://www.aladdinsys.com/, to access the file's contents. StuffIt Expander is
available as a freeware product. After unstuffing the, users should drag the
contents of the folder entitled "drag contents to EXTENSIONS" to their
extensions folder (inside the System Folder). Drag the contents of the folder
entitled "drag contents to Control Panels" to their control panels folder (also
inside the System Folder).... 

Windows 95/NT Version - ISS Screen Saver.scr (1.3Mb)
To install, save the .SCR module into the appropriate folder on your local hard
disk (drive C:):

* Windows 95 users need to open my computer, select drive C: and open it,
open the windows folder, and finally open the system folder. Click and drag the
attachment into the system folder. This may take a few seconds as this is a
1.7Mb file. You will see other ".scr" files in there. This is what gives you the
option to select screen savers.

* Windows NT users need to open my computer, select drive C: and open it,
open the winnt folder, and finally open the system32 folder. Click and drag the
attachment into the system32 folder. This may take a few seconds as this is a
1.7Mb file. You will see other ".scr" files in there. This is what gives you the
option to select screen savers. 

To select and adjust the screen saver properties, Select the Start button,
Select Settings, Select control panel navigate to the "Display" control panel,
click on the "Screen Saver" tab and click the "settings" button. (If you're not
running this module at 640x480, you should set the image size to "Medium" -
otherwise the images might appear rather grainy. {Screen transitions are also
defined on this tab.}) We recommend a 5 second delay between windows. We
also recommend a 5 minute delay before the saver starts.