RE-MOVEABLE APPLICATION
with PATCHGEAR GLUE

PATCH GLUE is NOT for use on fabrics or jeans!!

PatchGear & rhinestones applied with our special PatchGear Glue is re-moveable and re-useable on the following surfaces : LEATHER, VINYL, METAL, GLASS, PLASTIC, OIL PAINTED WALLS and FINISHED WOOD PRODUCTS.

Bonds to most porous and semi-porous surfaces.

Products made of the above materials can be decorated over and over again!

Here are some ideal products you can Gear Up... shoes, boots, sandals, dance shoes, purses, mirrors, lockers, binders, picture frames, rollerblades, skateboards, windows, computers, suitcases, briefcases, car dash boards, bedroom doors & walls (non-porous/oil painted), lunch boxes, stereos, CD carriers, make-up cases, photo albums & more!

Glue application: 1. Make sure surface is clean and dry. 2. Apply an even layer of glue to back of patch or area where patch will be attached. 3. Wait 1 minute for glue to become tacky before attaching to product. 4. Attach patch to area and press lightly, so the majority of glue does not ooze out. Clean away excess glue with a cotton swab or by rubbing away with fingers before glue dries. 5. Let patch dry for 5 minutes, then press lightly all over to set in place. 6. Allow 30 minutes for glue to fully dry.

Removal: Peel patch off surface. Rub away glue from surface and back of patch. You're ready to start over and gear up something new.

NOT recommended for use on delicate surfaces!!

*PatchGear's intended use is only temporary. Remove patches when done using or when glue starts to turn yellow.

PERMANENT IRON-ON APPLICATION
for T-SHIRTS & JEANS

Any PatchGear patches that come with a heat seal (HS) backing can be ironed-on permanently to T-shirts & jeans.

Iron-on application: 1. Heat iron to cotton setting (400 degrees). Do Not use steam. 2. Pre-heat fabric where patch is to be placed for 10-20 seconds. 3. Place heat seal side of patch on the garment. Cover with a fine cloth and press firmly for 15-20 seconds. 4. Turn garment inside out and iron back side of patch for 20-25 seconds. 5. Let cool for one minute. If edges lift up repeat step #4.

NOT recommended for use on delicate fabrics!!