STO'AWAY FEATURE DESCRIPTIONS
ELECTRIC DOUBLE GEARED MOTOR
A 110v high torque motor, to lift and lower the hard top.
WIRED REMOTE CONTROL
Up and down switch, cord extends to 6 feet in length.
Automatically stops the motor when top is fully lifted,
Never a worry of over lifting.
WORM GEARED WINCH
Lifts and lowers hard top without strain.
When cranking is stopped, it holds the weight at any level.
48" REMOVABLE HAND CRANK
Easily hooks onto system.
When removed, the system is tamper-proof.
2" WIDE NYLON LIFTING STRAP AND HARNESS
The 2" wide strap raises and lowers the hard top straight
without any spinning or twisting. The harness holds the
hard top without any clamps or metal hooks.
ADJUSTABLE PADDED STORAGE ARMS
Securely stores hard top, supporting it as on the automobile.
Pads conform to rubber molding to prevent indentions.
Arms adjust to "storage position" and different "clearance positions".
A device that unlocks the storage arms, to be adjusted,
by simply pulling a string (optional on the MANUAL STO'AWAY)
A rubber "fingered" ball, set to a predetermined height,
that guides the vehicle to proper location for STO'AWAY operation.
Made of the latest in car-cover material. It is water-proof,
mildew-proof, breathable fabric that extracts moisture from the inside-out.
The cover prevents the hard top from getting dusty or collecting cob webs.
Pictured on our Menu Web Page
Polyurethane cushions used to create a "gap" between the hard top
and the automobile, so that the harness straps may be easily inserted.
Gap cushions also "catch" hard top when re-installing hard top,
so that the guide/locking pins never contact (scratch) your paint.
Easy to follow, step by step, illustrated instructions for:
installation, removing the hard top, and re-installing the hard top.