This fuseholder is a great way to clean up your fuseholder installation. Fuses are accessible from the front of
the mounting panel while the wiring is kept tidily behind the mounting panel. A plastic cover is provided to cover the
fuses.
The 20 fuse positions in this fuseholder are split into two buses. One has 14 slots while the other has 6.
Each bus is fed by running a feeder wire to a 1/4" stud on the back of the fuse holder.
This Bussmann fuseholder is designed to use a Delphi Packard terminal on the output side of the fuse. The terminal
must be crimped onto the exit wire and then inserted into the fuseholder. Three sizes of terminals are available covering
20 - 12 AWG wire sizes. A "B" style crimper is necessary for crimping these terminals. The "B" crimper available
below for $32 is an economy crimper that does not have the ratcheting feature. A higher grade crimper is available
for $150 special order. It has the ratcheting feature and will crimp both the wire crimp and insulation crimp in the
same stroke and cover wire sizes 20 - 14.
