I decided to do this page because the only other page like it ( Tom Pigdens Muffler Mod) is long gone.  This is really for all of us who don't have the scratch for Arrows or Termi's or just like to DIY.   On to the mod!

For this modification, I began by purchasing a set of used stock 900ss pipes from a  Ducklister (thanks LH!) in case things went badly,  I would be able to write off the project with no tears or excessive money loss.  As it turns out I had no problems whatsoever.

 

THE TOOLS
	10 mm open or box end wrench 4mm hex key 14mm combo wrench\socket\adjustable hand held drill with 3/4 bit, 3/16 bit + 3/8 bit hand held grinder or file(s) cold chisel 3/16 punch automatic punch ball peen hammer rubber mallet/dead blow hammer block of wood  soft surface (folded towel) small grinding wheel 1 inch to 1.5 inch  or half round file hack saw and blades or "sawsall" if you have or can borrow one  magic marker trusting or foolhardy friend (Thanks RK) beer

MODIFY