Hydraulic Tubing Bender Conversion Plans & Construction Manual
Hot Rods, Customs, Choppers, Sand Rails, Off Road, Sports Cars!
Published by Desert Hybrids Precision Engineered Products, these professional plans will allow you to build the Hydraulic
Tubing Bender Conversion setup shown in the photos. This includes over 50 pages of CAD drawings and High Resolution Full Color
Photos. Convert your existing JD2 model 3 or similar manual tubing bender, or scratch build your own custom tubing bender
to accept JD2 bending dies.
The air-over-hydraulic conversion shown in the photos, which uses compressed air to operate the hydraulic jack, will
bend 1.5" diameter 0.120" wall tubing at a rate of approximately 1 degree per second. The Hydraulic Tubing Bender
Conversion Plans & Construction Manual are supplied on CD in PDF format. This allows you to print as many copies as you
need in as large a size as you like.
Includes the following High Resolution CAD Drawings:
Support Arm Assembly
Extension Arm Assembly
Ram Bolt/Spacer Assembly
Generic JD2 style Fixed Arm
Generic JD2 style Rotating Arm
Generic JD2 style Locating Pins
Includes the following High Resolution Photo & Information:
Construction Procedure photos
Finished Assembly photos
Sample Bending photos
Part Numbers and Prices
Sources for Parts & Materials
Now Available on CD in PDF Format
The Desert Hybrids Precision Hydraulic Tubing Bender Converson Plans & Construction Manual are supplied on CD in PDF format.
By either using the free Adobe Acrobat Reader or taking the CD to your local Fast Print Shop, you can print as many copies
as you need as large as you need!
plus $4.99 S/H