Windows Error Codes

Microsoft Basket Case Data BaseFor more detailed information on problem resolution try the Microsoft Knowledge Database:  

0     The operation completed successfully.
1     Incorrect function.
2     The system cannot find the file specified.
3     The system cannot find the path specified.
4     The system cannot open the file.
5     Access is denied.
6     The handle is invalid.
7     The storage control blocks were destroyed.
8     Not enough storage is available to process this command.
9     The storage control block address is invalid.
10     The environment is incorrect.
11     An attempt was made to load a program with an incorrect format.
12     The access code is invalid.
13     The data is invalid.
14     Not enough storage is available to complete this operation.
15     The system cannot find the drive specified.
16     The directory cannot be removed.
17     The system cannot move the file to a different disk drive.
18     There are no more files.
19     The media is write protected.
20     The system cannot find the device specified.
21     The device is not ready.
22     The device does not recognize the command.
23     Data error (cyclic redundancy check)
24     The program issued a command but the command length is incorrect.
25     The drive cannot locate a specific area or track on the disk.
26     The specified disk or diskette cannot be accessed.
27     The drive cannot find the sector requested.
28     The printer is out of paper.
29     The system cannot write to the specified device.
30     The system cannot read from the specified device.
31     A device attached to the system is not functioning.
32     The process cannot access the file because it is being used by another process.
33     The process cannot access the file because another process has locked a portion of the file.
34     The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
36     Too many files opened for sharing.
38     Reached end of file.
39     The disk is full.
50     The network request is not supported.
51     The remote computer is not available.
52     A duplicate name exists on the network.
53     The network path was not found.
54     The network is busy.
55     The specified network resource or device is no longer available.
56     The network BIOS command limit has been reached.
57     A network adapter hardware error occurred.
58     The specified server cannot perform the requested operation.
59     An unexpected network error occurred.
60     The remote adapter is not compatible.
61     The printer queue is full.
62     Space to store the file waiting to be printed is not available on the server.
63     Your file waiting to be printed was deleted.
64     The specified network name is no longer available.
65     Network access is denied.
66     The network resource type is not correct.
67     The network name cannot be found.
68     The name limit for the local computer network adapter card was exceeded.
69     The network BIOS session limit was exceeded.
70     The remote server has been paused or is in the process of being started.
71     No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
72     The specified printer or disk device has been paused.
80     The file exists.
82     The directory or file cannot be created.
83     Fail on INT 24
84     Storage to process this request is not available.
85     The local device name is already in use.
86     The specified network password is not correct.
87     The parameter is incorrect.
88     A write fault occurred on the network.
89     The system cannot start another process at this time.
100     Cannot create another system semaphore.
101     The exclusive semaphore is owned by another process.
102     The semaphore is set and cannot be closed.
103     The semaphore cannot be set again.
104     Cannot request exclusive semaphores at interrupt time.
105     The previous ownership of this semaphore has ended.
106     Insert the diskette for drive %1.
107     Program stopped because alternate diskette was not inserted.
108     The disk is in use or locked by another process.
109     The pipe has been ended.
110     The system cannot open the device or file specified.
111     The file name is too long.
112     There is not enough space on the disk.
113     No more internal file identifiers available.
114     The target internal file identifier is incorrect.
117     The IOCTL call made by the application program is not correct.
118     The verify-on-write switch parameter value is not correct.
119     The system does not support the command requested.
120     This function is only valid in Win32 mode.
121     The semaphore timeout period has expired.
122     The data area passed to a system call is too small.
123     The filename, directory name, or volume label syntax is incorrect.
124     The system call level is not correct.
125     The disk has no volume label.
126     The specified module could not be found.
127     The specified procedure could not be found.
128     There are no child processes to wait for.
129     The %1 application cannot be run in Win32 mode.
130     Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
131     An attempt was made to move the file pointer before the beginning of the file.
132     The file pointer cannot be set on the specified device or file.
133     A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
134     An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
135     An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
136     The system tried to delete the JOIN of a drive that is not joined.
137     The system tried to delete the substitution of a drive that is not substituted.
138     The system tried to join a drive to a directory on a joined drive.
139     The system tried to substitute a drive to a directory on a substituted drive.
140     The system tried to join a drive to a directory on a substituted drive.
141     The system tried to SUBST a drive to a directory on a joined drive.
142     The system cannot perform a JOIN or SUBST at this time.
143     The system cannot join or substitute a drive to or for a directory on the same drive.
144     The directory is not a subdirectory of the root directory.
145     The directory is not empty.
146     The path specified is being used in a substitute.
147     Not enough resources are available to process this command.
148     The path specified cannot be used at this time.
149     An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
150     System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
151     The number of specified semaphore events for DosMuxSemWait is not correct.
152     DosMuxSemWait did not execute; too many semaphores are already set.
153     The DosMuxSemWait list is not correct.
154     The volume label you entered exceeds the label character limit of the target file system.
155     Cannot create another thread.
156     The recipient process has refused the signal.
157     The segment is already discarded and cannot be locked.
158     The segment is already unlocked.
159     The address for the thread ID is not correct.
160     The argument string passed to DosExecPgm is not correct.
161     The specified path is invalid.
162     A signal is already pending.
164     No more threads can be created in the system.
167     Unable to lock a region of a file.
170     The requested resource is in use.
173     A lock request was not outstanding for the supplied cancel region.
174     The file system does not support atomic changes to the lock type.
180     The system detected a segment number that was not correct.
182     The operating system cannot run %1.
183     Cannot create a file when that file already exists.
186     The flag passed is not correct.
187     The specified system semaphore name was not found.
188     The operating system cannot run %1.
189     The operating system cannot run %1.
190     The operating system cannot run %1.
191     Cannot run %1 in Win32 mode.
192     The operating system cannot run %1.
193     %1 is not a valid Win32 application.
194     The operating system cannot run %1.
195     The operating system cannot run %1.
196     The operating system cannot run this application program.
197     The operating system is not presently configured to run this application.
198     The operating system cannot run %1.
199     The operating system cannot run this application program.
200     The code segment cannot be greater than or equal to 64KB.
201     The operating system cannot run %1.
202     The operating system cannot run %1.
203     The system could not find the environment option that was entered.
205     No process in the command subtree has a signal handler.
206     The filename or extension is too long.
207     The ring 2 stack is in use.
208     The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
209     The signal being posted is not correct.
210     The signal handler cannot be set.
212     The segment is locked and cannot be reallocated.
214     Too many dynamic link modules are attached to this program or dynamic link module.
215     Can't nest calls to LoadModule.
230     The pipe state is invalid.
231     All pipe instances are busy.
232     The pipe is being closed.
233     No process is on the other end of the pipe.
234     More data is available.
240     The session was cancelled.
254     The specified extended attribute name was invalid.
255     The extended attributes are inconsistent.
259     No more data is available.
266     The Copy API cannot be used.
267     The directory name is invalid.
275     The extended attributes did not fit in the buffer.
276     The extended attribute file on the mounted file system is corrupt.
277     The extended attribute table file is full.
278     The specified extended attribute handle is invalid.
282     The mounted file system does not support extended attributes.
288     Attempt to release mutex not owned by caller.
298     Too many posts were made to a semaphore.
299     Only part of a Read/WriteProcessMemory request was completed.
317     The system cannot find message for message number 0x%1 in message file for %2.
487     Attempt to access invalid address.
534     Arithmetic result exceeded 32 bits.
535     There is a process on other end of the pipe.
536     Waiting for a process to open the other end of the pipe.
994     Access to the extended attribute was denied.
995     The I/O operation has been aborted because of either a thread exit or an application request.
996     Overlapped I/O event is not in a signalled state.
997     Overlapped I/O operation is in progress.
998     Invalid access to memory location.
999     Error performing inpage operation.
1001     Recursion too deep, stack overflowed.
1002     The window cannot act on the sent message.
1003     Cannot complete this function.
1004     Invalid flags.
1005     The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt.
1006     The volume for a file has been externally altered such that the opened file is no longer valid.
1007     The requested operation cannot be performed in full-screen mode.
1008     An attempt was made to reference a token that does not exist.
1009     The configuration registry database is corrupt.
1010     The configuration registry key is invalid.
1011     The configuration registry key could not be opened.
1012     The configuration registry key could not be read.
1013     The configuration registry key could not be written.
1014     One of the files in the Registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
1015     The Registry is corrupt. The structure of one of the files that contains Registry data is corrupt, or the system's image of the file in memory is corrupt, or the file could not be recovered because the alternate copy or log was absent or corrupt.
1016     An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry.
1017     The system has attempted to load or restore a file into the Registry, but the specified file is not in a Registry file format.
1018     Illegal operation attempted on a Registry key which has been marked for deletion.
1019     System could not allocate the required space in a Registry log.
1020     Cannot create a symbolic link in a Registry key that already has subkeys or values.
1021     Cannot create a stable subkey under a volatile parent key.
1022     A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
1051     A stop control has been sent to a service which other running services are dependent on.
1052     The requested control is not valid for this service
1053     The service did not respond to the start or control request in a timely fashion.
1054     A thread could not be created for the service.
1055     The service database is locked.
1056     An instance of the service is already running.
1057     The account name is invalid or does not exist.
1058     The specified service is disabled and cannot be started.
1059     Circular service dependency was specified.
1060     The specified service does not exist as an installed service.
1061     The service cannot accept control messages at this time.
1062     The service has not been started.
1063     The service process could not connect to the service controller.
1064     An exception occurred in the service when handling the control request.
1065     The database specified does not exist.
1066     The service has returned a service-specific error code.
1067     The process terminated unexpectedly.
1068     The dependency service or group failed to start.
1069     The service did not start due to a logon failure.
1070     After starting, the service hung in a start-pending state.
1071     The specified service database lock is invalid.
1072     The specified service has been marked for deletion.
1073     The specified service already exists.
1074     The system is currently running with the last-known-good configuration.
1075     The dependency service does not exist or has been marked for deletion.
1076     The current boot has already been accepted for use as the last-known-good control set.
1077     No attempts to start the service have been made since the last boot.
1078     The name is already in use as either a service name or a service display name.
1100     The physical end of the tape has been reached.
1101     A tape access reached a filemark.
1102     Beginning of tape or partition was encountered.
1103     A tape access reached the end of a set of files.
1104     No more data is on the tape.
1105     Tape could not be partitioned.
1106     When accessing a new tape of a multivolume partition, the current blocksize is incorrect.
1107     Tape partition information could not be found when loading a tape.
1108     Unable to lock the media eject mechanism.
1109     Unable to unload the media.
1110     Media in drive may have changed.
1111     The I/O bus was reset.
1112     No media in drive.
1113     No mapping for the Unicode character exists in the target multi-byte code page.
1114     A dynamic link library (DLL) initialization routine failed.
1115     A system shutdown is in progress.
1116     Unable to abort the system shutdown because no shutdown was in progress.
1117     The request could not be performed because of an I/O device error.
1118     No serial device was successfully initialized. The serial driver will unload.
1119     Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
1120     A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
1121     A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
1122     No ID address mark was found on the floppy disk.
1123     Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
1124     The floppy disk controller reported an error that is not recognized by the floppy disk driver.
1125     The floppy disk controller returned inconsistent results in its registers.
1126     While accessing the hard disk, a recalibrate operation failed, even after retries.
1127     While accessing the hard disk, a disk operation failed even after retries.
1128     While accessing the hard disk, a disk controller reset was needed, but even that failed.
1129     Physical end of tape encountered.
1130     Not enough server storage is available to process this command.
1131     A potential deadlock condition has been detected.
1132     The base address or the file offset specified does not have the proper alignment.
1140     An attempt to change the system power state was vetoed by another application or driver.
1141     The system BIOS failed an attempt to change the system power state.
1150     The specified program requires a newer version of Windows.
1151     The specified program is not a Windows or MS-DOS program.
1152     Cannot start more than one instance of the specified program.
1153     The specified program was written for an older version of Windows.
1154     One of the library files needed to run this application is damaged.
1155     No application is associated with the specified file for this operation.
1156     An error occurred in sending the command to the application.
1157     One of the library files needed to run this application cannot be found.
1200     The specified device name is invalid.
1201     The device is not currently connected but it is a remembered connection.
1202     An attempt was made to remember a device that had previously been remembered.
1203     No network provider accepted the given network path.
1204     The specified network provider name is invalid.
1205     Unable to open the network connection profile.
1206     The network connection profile is corrupt.
1207     Cannot enumerate a non-container.
1208     An extended error has occurred.
1209     The format of the specified group name is invalid.
1210     The format of the specified computer name is invalid.
1211     The format of the specified event name is invalid.
1212     The format of the specified domain name is invalid.
1213     The format of the specified service name is invalid.
1214     The format of the specified network name is invalid.
1215     The format of the specified share name is invalid.
1216     The format of the specified password is invalid.
1217     The format of the specified message name is invalid.
1218     The format of the specified message destination is invalid.
1219     The credentials supplied conflict with an existing set of credentials.
1220     An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
1221     The workgroup or domain name is already in use by another computer on the network.
1222     The network is not present or not started.
1223     The operation was cancelled by the user.
1224     The requested operation cannot be performed on a file with a user mapped section open.
1225     The remote system refused the network connection.
1226     The network connection was gracefully closed.
1227     The network transport endpoint already has an address associated with it.
1228     An address has not yet been associated with the network endpoint.
1229     An operation was attempted on a non-existent network connection.
1230     An invalid operation was attempted on an active network connection.
1231     The remote network is not reachable by the transport.
1232     The remote system is not reachable by the transport.
1233     The remote system does not support the transport protocol.
1234     No service is operating at the destination network endpoint on the remote system.
1235     The request was aborted.
1236     The network connection was aborted by the local system.
1237     The operation could not be completed. A retry should be performed.
1238     A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
1239     Attempting to login during an unauthorized time of day for this account.
1240     The account is not authorized to login from this station.
1241     The network address could not be used for the operation requested.
1242     The service is already registered.
1243     The specified service does not exist.
1244     The operation being requested was not performed because the user has not been authenticated.
1245     The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
1246     Return that wants caller to continue with work in progress.
1247     An attempt was made to perform an initialization operation when initialization has already been completed.
1248     No more local devices.
1300     Not all privileges referenced are assigned to the caller.
1301     Some mapping between account names and security IDs was not done.
1302     No system quota limits are specifically set for this account.
1303     No encryption key is available. A well-known encryption key was returned.
1304     The NT password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.
1305     The revision level is unknown.
1306     Indicates two revision levels are incompatible.
1307     This security ID may not be assigned as the owner of this object.
1308     This security ID may not be assigned as the primary group of an object.
1309     An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
1310     The group may not be disabled.
1311     There are currently no logon servers available to service the logon request.
1312     A specified logon session does not exist. It may already have been terminated.
1313     A specified privilege does not exist.
1314     A required privilege is not held by the client.
1315     The name provided is not a properly formed account name.
1316     The specified user already exists.
1317     The specified user does not exist.
1318     The specified group already exists.
1319     The specified group does not exist.
1320     Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
1321     The specified user account is not a member of the specified group account.
1322     The last remaining administration account cannot be disabled or deleted.
1323     Unable to update the password. The value provided as the current password is incorrect.
1324     Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
1325     Unable to update the password because a password update rule has been violated.
1326     Logon failure: unknown user name or bad password.
1327     Logon failure: user account restriction.
1328     Logon failure: account logon time restriction violation.
1329     Logon failure: user not allowed to log on to this computer.
1330     Logon failure: the specified account password has expired.
1331     Logon failure: account currently disabled.
1332     No mapping between account names and security IDs was done.
1333     Too many local user identifiers (LUIDs) were requested at one time.
1334     No more local user identifiers (LUIDs) are available.
1335     The subauthority part of a security ID is invalid for this particular use.
1336     The access control list (ACL) structure is invalid.
1337     The security ID structure is invalid.
1338     The security descriptor structure is invalid.
1340     The inherited access control list (ACL) or access control entry (ACE) could not be built.
1341     The server is currently disabled.
1342     The server is currently enabled.
1343     The value provided was an invalid value for an identifier authority.
1344     No more memory is available for security information updates.
1345     The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
1346     Either a required impersonation level was not provided, or the provided impersonation level is invalid.
1347     Cannot open an anonymous level security token.
1348     The validation information class requested was invalid.
1349     The type of the token is inappropriate for its attempted use.
1350     Unable to perform a security operation on an object which has no associated security.
1351     Indicates a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved.
1352     The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
1353     The domain was in the wrong state to perform the security operation.
1354     This operation is only allowed for the Primary Domain Controller of the domain.
1355     The specified domain did not exist.
1356     The specified domain already exists.
1357     An attempt was made to exceed the limit on the number of domains per server.
1358     Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
1359     The security account database contains an internal inconsistency.
1360     Generic access types were contained in an access mask which should already be mapped to non-generic types.
1361     A security descriptor is not in the right format (absolute or self-relative).
1362     The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
1363     Cannot start a new logon session with an ID that is already in use.
1364     A specified authentication package is unknown.
1365     The logon session is not in a state that is consistent with the requested operation.
1366     The logon session ID is already in use.
1367     A logon request contained an invalid logon type value.
1368     Unable to impersonate via a named pipe until data has been read from that pipe.
1369     The transaction state of a Registry subtree is incompatible with the requested operation.
1370     An internal security database corruption has been encountered.
1371     Cannot perform this operation on built-in accounts.
1372     Cannot perform this operation on this built-in special group.
1373     Cannot perform this operation on this built-in special user.
1374     The user cannot be removed from a group because the group is currently the user's primary group.
1375     The token is already in use as a primary token.
1376     The specified local group does not exist.
1377     The specified account name is not a member of the local group.
1378     The specified account name is already a member of the local group.
1379     The specified local group already exists.
1380     Logon failure: the user has not been granted the requested logon type at this computer.
1381     The maximum number of secrets that may be stored in a single system has been exceeded.
1382     The length of a secret exceeds the maximum length allowed.
1383     The local security authority database contains an internal inconsistency.
1384     During a logon attempt, the user's security context accumulated too many security IDs.
1385     Logon failure: the user has not been granted the requested logon type at this computer.
1386     A cross-encrypted password is necessary to change a user password.
1387     A new member could not be added to a local group because the member does not exist.
1388     A new member could not be added to a local group because the member has the wrong account type.
1389     Too many security IDs have been specified.
1390     A cross-encrypted password is necessary to change this user password.
1391     Indicates an ACL contains no inheritable components
1392     The file or directory is corrupt and non-readable.
1393     The disk structure is corrupt and non-readable.
1394     There is no user session key for the specified logon session.
1395     The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.
1400     Invalid window handle.
1401     Invalid menu handle.
1402     Invalid cursor handle.
1403     Invalid accelerator table handle.
1404     Invalid hook handle.
1405     Invalid handle to a multiple-window position structure.
1406     Cannot create a top-level child window.
1407     Cannot find window class.
1408     Invalid window, belongs to other thread.
1409     Hot key is already registered.
1410     Class already exists.
1411     Class does not exist.
1412     Class still has open windows.
1413     Invalid index.
1414     Invalid icon handle.
1415     Using private DIALOG window words.
1416     The listbox identifier was not found.
1417     No wildcards were found.
1418     Thread does not have a clipboard open.
1419     Hot key is not registered.
1420     The window is not a valid dialog window.
1421     Control ID not found.
1422     Invalid message for a combo box because it does not have an edit control.
1423     The window is not a combo box.
1424     Height must be less than 256.
1425     Invalid device context (DC) handle.
1426     Invalid hook procedure type.
1427     Invalid hook procedure.
1428     Cannot set non-local hook without a module handle.
1429     This hook procedure can only be set globally.
1430     The journal hook procedure is already installed.
1431     The hook procedure is not installed.
1432     Invalid message for single-selection listbox.
1433     LB_SETCOUNT sent to non-lazy listbox.
1434     This list box does not support tab stops.
1435     Cannot destroy object created by another thread.
1436     Child windows cannot have menus.
1437     The window does not have a system menu.
1438     Invalid message box style.
1439     Invalid system-wide (SPI_*) parameter.
1440     Screen already locked.
1441     All handles to windows in a multiple-window position structure must have the same parent.
1442     The window is not a child window.
1443     Invalid GW_* command.
1444     Invalid thread identifier.
1445     Cannot process a message from a window that is not a multiple document interface (MDI) window.
1446     Popup menu already active.
1447     The window does not have scroll bars.
1448     Scroll bar range cannot be greater than 0x7FFF.
1449     Cannot show or remove the window in the way specified.
1450     Insufficient system resources exist to complete the requested service.
1451     Insufficient system resources exist to complete the requested service.
1452     Insufficient system resources exist to complete the requested service.
1453     Insufficient quota to complete the requested service.
1454     Insufficient quota to complete the requested service.
1455     The paging file is too small for this operation to complete.
1456     A menu item was not found.
1500     The event log file is corrupt.
1501     No event log file could be opened, so the event logging service did not start.
1502     The event log file is full.
1503     The event log file has changed between reads.
1700     The string binding is invalid.
1701     The binding handle is not the correct type.
1702     The binding handle is invalid.
1703     The RPC protocol sequence is not supported.
1704     The RPC protocol sequence is invalid.
1705     The string universal unique identifier (UUID) is invalid.
1706     The endpoint format is invalid.
1707     The network address is invalid.
1708     No endpoint was found.
1709     The timeout value is invalid.
1710     The object universal unique identifier (UUID) was not found.
1711     The object universal unique identifier (UUID) has already been registered.
1712     The type universal unique identifier (UUID) has already been registered.
1713     The RPC server is already listening.
1714     No protocol sequences have been registered.
1715     The RPC server is not listening.
1716     The manager type is unknown.
1717     The interface is unknown.
1718     There are no bindings.
1719     There are no protocol sequences.
1720     The endpoint cannot be created.
1721     Not enough resources are available to complete this operation.
1722     The RPC server is unavailable.
1723     The RPC server is too busy to complete this operation.
1724     The network options are invalid.
1725     There is not a remote procedure call active in this thread.
1726     The remote procedure call failed.
1727     The remote procedure call failed and did not execute.
1728     A remote procedure call (RPC) protocol error occurred.
1730     The transfer syntax is not supported by the RPC server.
1732     The universal unique identifier (UUID) type is not supported.
1733     The tag is invalid.
1734     The array bounds are invalid.
1735     The binding does not contain an entry name.
1736     The name syntax is invalid.
1737     The name syntax is not supported.
1739     No network address is available to use to construct a universal unique identifier (UUID).
1740     The endpoint is a duplicate.
1741     The authentication type is unknown.
1742     The maximum number of calls is too small.
1743     The string is too long.
1744     The RPC protocol sequence was not found.
1745     The procedure number is out of range.
1746     The binding does not contain any authentication information.
1747     The authentication service is unknown.
1748     The authentication level is unknown.
1749     The security context is invalid.
1750     The authorization service is unknown.
1751     The entry is invalid.
1752     The server endpoint cannot perform the operation.
1753     There are no more endpoints available from the endpoint mapper.
1754     No interfaces have been exported.
1755     The entry name is incomplete.
1756     The version option is invalid.
1757     There are no more members.
1758     There is nothing to unexport.
1759     The interface was not found.
1760     The entry already exists.
1761     The entry is not found.
1762     The name service is unavailable.
1763     The network address family is invalid.
1764     The requested operation is not supported.
1765     No security context is available to allow impersonation.
1766     An internal error occurred in a remote procedure call (RPC).
1767     The RPC server attempted an integer division by zero.
1768     An addressing error occurred in the RPC server.
1769     A floating-point operation at the RPC server caused a division by zero.
1770     A floating-point underflow occurred at the RPC server.
1771     A floating-point overflow occurred at the RPC server.
1772     The list of RPC servers available for the binding of auto handles has been exhausted.
1773     Unable to open the character translation table file.
1774     The file containing the character translation table has fewer than 512 bytes.
1775     A null context handle was passed from the client to the host during a remote procedure call.
1777     The context handle changed during a remote procedure call.
1778     The binding handles passed to a remote procedure call do not match.
1779     The stub is unable to get the remote procedure call handle.
1780     A null reference pointer was passed to the stub.
1781     The enumeration value is out of range.
1782     The byte count is too small.
1783     The stub received bad data.
1784     The supplied user buffer is not valid for the requested operation.
1785     The disk media is not recognized. It may not be formatted.
1786     The workstation does not have a trust secret.
1787     The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship.
1788     The trust relationship between the primary domain and the trusted domain failed.
1789     The trust relationship between this workstation and the primary domain failed.
1790     The network logon failed.
1791     A remote procedure call is already in progress for this thread.
1792     An attempt was made to logon, but the network logon service was not started.
1793     The user's account has expired.
1794     The redirector is in use and cannot be unloaded.
1795     The specified printer driver is already installed.
1796     The specified port is unknown.
1797     The printer driver is unknown.
1798     The print processor is unknown.
1799     The specified separator file is invalid.
1800     The specified priority is invalid.
1801     The printer name is invalid.
1802     The printer already exists.
1803     The printer command is invalid.
1804     The specified datatype is invalid.
1805     The Environment specified is invalid.
1806     There are no more bindings.
1807     The account used is an interdomain trust account. Use your global user account or local user account to access this server.
1808     The account used is a Computer Account. Use your global user account or local user account to access this server.
1809     The account used is an server trust account. Use your global user account or local user account to access this server.
1810     The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.
1811     The server is in use and cannot be unloaded.
1812     The specified image file did not contain a resource section.
1813     The specified resource type can not be found in the image file.
1814     The specified resource name can not be found in the image file.
1815     The specified resource language ID cannot be found in the image file.
1816     Not enough quota is available to process this command.
1817     No interfaces have been registered.
1818     The server was altered while processing this call.
1819     The binding handle does not contain all required information.
1820     Communications failure.
1821     The requested authentication level is not supported.
1822     No principal name registered.
1823     The error specified is not a valid Windows RPC error code.
1824     A UUID that is valid only on this computer has been allocated.
1825     A security package specific error occurred.
1826     Thread is not cancelled.
1827     Invalid operation on the encoding/decoding handle.
1828     Incompatible version of the serializing package.
1829     Incompatible version of the RPC stub.
1898     The group member was not found.
1899     The endpoint mapper database could not be created.
1900     The object universal unique identifier (UUID) is the nil UUID.
1901     The specified time is invalid.
1902     The specified Form name is invalid.
1903     The specified Form size is invalid
1904     The specified Printer handle is already being waited on
1905     The specified Printer has been deleted
1906     The state of the Printer is invalid
1907     The user must change his password before he logs on the first time.
1908     Could not find the domain controller for this domain.
1909     The referenced account is currently locked out and may not be logged on to.
2000     The pixel format is invalid.
2001     The specified driver is invalid.
2002     The window style or class attribute is invalid for this operation.
2003     The requested metafile operation is not supported.
2004     The requested transformation operation is not supported.
2005     The requested clipping operation is not supported.
2202     The specified username is invalid.
2250     This network connection does not exist.
2401     This network connection has files open or requests pending.
2402     Active connections still exist.
2404     The device is in use by an active process and cannot be disconnected.
3000     The specified print monitor is unknown.
3001     The specified printer driver is currently in use.
3002     The spool file was not found.
3003     A StartDocPrinter call was not issued.
3004     An AddJob call was not issued.
3005     The specified print processor has already been installed.
3006     The specified print monitor has already been installed.
4000     WINS encountered an error while processing the command.
4001     The local WINS can not be deleted.
4002     The importation from the file failed.
4003     The backup Failed. Was a full backup done before ?
4004     The backup Failed. Check the directory that you are backing the database to.
4005     The name does not exist in the WINS database.
4006     Replication with a non-configured partner is not allowed.
6118     The list of servers for this workgroup is not currently available

OLE Error Codes

 

&H80000001 Not implemented

&H80000002 Ran out of memory

&H80000003 One or more arguments are invalid

&H80000004 No such interface supported

&H80000005 Invalid pointer

&H80000006 Invalid handle

&H80000007 Operation aborted

&H80000008 Unspecified error

&H80000009 General access denied error

&H80004001 Not implemented

&H80004002 No such interface supported

&H80004003 Invalid pointer

&H80004004 Operation aborted

&H80004005 Unspecified error

&H80004006 Thread local storage failure

&H80004007 Get shared memory allocator failure

&H80004008 Get memory allocator failure

&H80004009 Unable to initialize class cache

&H8000400A Unable to initialize RPC services

&H8000400B Cannot set thread local storage channel control

&H8000400C Could not allocate thread local storage channel control

&H8000400D The user supplied memory allocator is unacceptable

&H8000400E The OLE service mutex already exists

&H8000400F The OLE service file mapping already exists

&H80004010 Unable to map view of file for OLE service

&H80004011 Failure attempting to launch OLE service

&H80004012 There was an attempt to call CoInitialize a second time while single threaded

&H8000FFFF Unexpected failure

&H80010001 Call was rejected by callee.

&H80010002 Call was canceled by the message filter.

&H80010003 The caller is dispatching an intertask SendMessage call and cannot call out via PostMessage.

&H80010004 The caller is dispatching an asynchronous call and cannot make an outgoing call on behalf of this call.

&H80010005 It is illegal to call out while inside message filter.

&H80010006 The connection terminated or is in a bogus state and cannot be used any more. Other connections are still valid.

&H80010007 The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed.

&H80010008 The caller (client) disappeared while the callee (server) was processing a call.

&H80010009 The data packet with the marshalled parameter data is incorrect.

&H8001000A The call was not transmitted properly; the message queue was full and was not emptied after yielding.

&H8001000B The client (caller) cannot marshall the parameter data - low memory, etc.

&H8001000C The client (caller) cannot unmarshall the return data - low memory, etc.

&H8001000D The server (callee) cannot marshall the return data - low memory, etc.

&H8001000E The server (callee) cannot unmarshall the parameter data - low memory, etc.

&H8001000F Received data is invalid; could be server or client data.

&H80010010 A particular parameter is invalid and cannot be (un)marshalled.

&H80010011 There is no second outgoing call on same channel in DDE conversation.

&H80010012 The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call did not execute.

&H80010100 System call failed.

&H80010101 Could not allocate some required resource (memory, events, ...)

&H80010102 Attempted to make calls on more than one thread in single threaded mode.

&H80010103 The requested interface is not registered on the server object.

&H80010104 RPC could not call the server or could not return the results of calling the server.

&H80010105 The server threw an exception.

&H80010106 Cannot change thread mode after it is set.

&H80010107 The method called does not exist on the server.

&H80010108 The object invoked has disconnected from its clients.

&H80010109 The object invoked chose not to process the call now. Try again later.

&H8001010A The message filter indicated that the application is busy.

&H8001010B The message filter rejected the call.

&H8001010C A call control interfaces was called with invalid data.

&H8001010D An outgoing call cannot be made since the application is dispatching an input-synchronous call.

&H8001010E The application called an interface that was marshalled for a different thread.

&H8001010F CoInitialize has not been called on the current thread.

&H8001FFFF An internal error occurred.

&H80020001 Unknown interface.

&H80020003 Member not found.

&H80020004 Parameter not found.

&H80020005 Type mismatch.

&H80020006 Unknown name.

&H80020007 No named arguments.

&H80020008 Bad variable type.

&H80020009 Exception occurred.

&H8002000A Out of present range.

&H8002000B Invalid index.

&H8002000C Unknown language.

&H8002000D Memory is locked.

&H8002000E Invalid number of parameters.

&H8002000F Parameter not optional.

&H80020010 Invalid callee.

&H80020011 Does not support a collection.

&H80028016 Buffer too small.

&H80028018 Old format or invalid type library.

&H80028019 Old format or invalid type library.

&H8002801C Error accessing the OLE registry.

&H8002801D Library not registered.

&H80028027 Bound to unknown type.

&H80028028 Qualified name disallowed.

&H80028029 Invalid forward reference, or reference to uncompiled type.

&H8002802A Type mismatch.

&H8002802B Element not found.

&H8002802C Ambiguous name.

&H8002802D Name already exists in the library.

&H8002802E Unknown LCID.

&H8002802F Function not defined in specified DLL.

&H800288BD Wrong module kind for the operation.

&H800288C5 Size may not exceed 64K.

&H800288C6 Duplicate ID in inheritance hierarchy.

&H800288CF Incorrect inheritance depth in standard OLE hmember.

&H80028CA0 Type mismatch.

&H80028CA1 Invalid number of arguments.

&H80028CA2 I/O Error.

&H80028CA3 Error creating unique tmp file.

&H80029C4A Error loading type library/DLL.

&H80029C83 Inconsistent property functions.

&H80029C84 Circular dependency between types/modules.

&H80030001 Unable to perform requested operation.

&H80030002 %1 could not be found.

&H80030003 The path %1 could not be found.

&H80030004 There are insufficient resources to open another file.

&H80030005 Access Denied.

&H80030006 Attempted an operation on an invalid object.

&H80030008 There is insufficient memory available to complete operation.

&H80030009 Invalid pointer error.

&H80030012 There are no more entries to return.

&H80030013 Disk is write-protected.

&H80030019 An error occurred during a seek operation.

&H8003001D A disk error occurred during a write operation.

&H8003001E A disk error occurred during a read operation.

&H80030020 A share violation has occurred.

&H80030021 A lock violation has occurred.

&H80030050 %1 already exists.

&H80030057 Invalid parameter error.

&H80030070 There is insufficient disk space to complete operation.

&H800300FA An API call exited abnormally.

&H800300FB The file %1 is not a valid compound file.

&H800300FC The name %1 is not valid.

&H800300FD An unexpected error occurred.

&H800300FE That function is not implemented.

&H800300FF Invalid flag error.

&H80030100 Attempted to use an object that is busy.

&H80030101 The storage has been changed since the last commit.

&H80030102 Attempted to use an object that has ceased to exist.

&H80030103 Can't save.

&H80030104 The compound file %1 was produced with an incompatible version of storage.

&H80030105 The compound file %1 was produced with a newer version of storage.

&H80030106 Share.exe or equivalent is required for operation.

&H80030107 Illegal operation called on non-file based storage.

&H80030108 Illegal operation called on object with extant marshallings.

&H80040000 Invalid OLEVERB structure

&H80040001 Invalid advise flags

&H80040002 Can't enumerate any more, because the associated data is missing

&H80040003 This implementation doesn't take advises

&H80040004 There is no connection for this connection ID

&H80040005 Need to run the object to perform this operation

&H80040006 There is no cache to operate on

&H80040007 Uninitialized object

&H80040008 Linked object's source class has changed

&H80040009 Not able to get the moniker of the object

&H8004000A Not able to bind to the source

&H8004000B Object is static; operation not allowed

&H8004000C User cancelled out of save dialog

&H8004000D Invalid rectangle

&H8004000E compobj.dll is too old for the ole2.dll initialized

&H8004000F Invalid window handle

&H80040010 Object is not in any of the inplace active states

&H80040011 Not able to convert object

&H80040012 Not able to perform the operation because object is not given storage yet

&H80040064 Invalid FORMATETC structure

&H80040065 Invalid DVTARGETDEVICE structure

&H80040066 Invalid STDGMEDIUM structure

&H80040067 Invalid STATDATA structure

&H80040068 Invalid lindex

&H80040069 Invalid tymed

&H8004006A Invalid clipboard format

&H8004006B Invalid aspect(s)

&H8004006C tdSize parameter of the DVTARGETDEVICE structure is invalid

&H8004006D Object doesn't support IViewObject interface

&H80040100 Trying to revoke a drop target that has not been registered

&H80040101 This window has already been registered as a drop target

&H80040102 Invalid window handle

&H80040110 Class does not support aggregation (or class object is remote)

&H80040111 ClassFactory cannot supply requested class

&H80040140 Error drawing view

&H80040150 Could not read key from registry

&H80040151 Could not write key to registry

&H80040152 Could not find the key in the registry

&H80040153 Invalid value for registry

&H80040154 Class not registered

&H80040155 Interface not registered

&H80040170 Cache not updated

&H80040180 No verbs for OLE object

&H80040181 Invalid verb for OLE object

&H800401A0 Undo is not available

&H800401A1 Space for tools is not available

&H800401C0 OLESTREAM Get method failed

&H800401C1 OLESTREAM Put method failed

&H800401C2 Contents of the OLESTREAM not in correct format

&H800401C3 There was an error in a Windows GDI call while converting the bitmap to a DIB

&H800401C4 Contents of the IStorage not in correct format

&H800401C5 Contents of IStorage is missing one of the standard streams

&H800401C6 There was an error in a Windows GDI call while converting the DIB to a bitmap.

&H800401D0 OpenClipboard Failed

&H800401D1 EmptyClipboard Failed

&H800401D2 SetClipboard Failed

&H800401D3 Data on clipboard is invalid

&H800401D4 CloseClipboard Failed

&H800401E0 Moniker needs to be connected manually

&H800401E1 Operation exceeded deadline

&H800401E2 Moniker needs to be generic

&H800401E3 Operation unavailable

&H800401E4 Invalid syntax

&H800401E5 No object for moniker

&H800401E6 Bad extension for file

&H800401E7 Intermediate operation failed

&H800401E8 Moniker is not bindable

&H800401E9 Moniker is not bound

&H800401EA Moniker cannot open file

&H800401EB User input required for operation to succeed

&H800401EC Moniker class has no inverse

&H800401ED Moniker does not refer to storage

&H800401EE No common prefix

&H800401EF Moniker could not be enumerated

&H800401F0 CoInitialize has not been called.

&H800401F1 CoInitialize has already been called.

&H800401F2 Class of object cannot be determined

&H800401F3 Invalid class string

&H800401F4 Invalid interface string

&H800401F5 Application not found

&H800401F6 Application cannot be run more than once

&H800401F7 Some error in application program

&H800401F8 DLL for class not found

&H800401F9 Error in the DLL

&H800401FA Wrong OS or OS version for application

&H800401FB Object is not registered

&H800401FC Object is already registered

&H800401FD Object is not connected to server

&H800401FE Application was launched but it didn't register a class factory

&H800401FF Object has been released

&H80070000 The operation completed successfully.

&H80070001 Incorrect function.

&H80070002 The system cannot find the file specified.

&H80070003 The system cannot find the path specified.

&H80070004 The system cannot open the file.

&H80070005 Access is denied.

&H80070006 The handle is invalid.

&H80070007 The storage control blocks were destroyed.

&H80070008 Not enough storage is available to process this command.

&H80070009 The storage control block address is invalid.

&H8007000A The environment is incorrect.

&H8007000B An attempt was made to load a program with an incorrect format.

&H8007000C The access code is invalid.

&H8007000D The data is invalid.

&H8007000E Not enough storage is available to complete this operation.

&H8007000F The system cannot find the drive specified.

&H80070010 The directory cannot be removed.

&H80070011 The system cannot move the file to a different disk drive.

&H80070012 There are no more files.

&H80070013 The media is write protected.

&H80070014 The system cannot find the device specified.

&H80070015 The device is not ready.

&H80070016 The device does not recognize the command.

&H80070017 Data error (cyclic redundancy check)

&H80070018 The program issued a command but the command length is incorrect.

&H80070019 The drive cannot locate a specific area or track on the disk.

&H8007001A The specified disk or diskette cannot be accessed.

&H8007001B The drive cannot find the sector requested.

&H8007001C The printer is out of paper.

&H8007001D The system cannot write to the specified device.

&H8007001E The system cannot read from the specified device.

&H8007001F A device attached to the system is not functioning.

&H80070020 The process cannot access the file because it is being used by another process.

&H80070021 The process cannot access the file because another process has locked a portion of the file.

&H80070022 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.

&H80070024 Too many files opened for sharing.

&H80070026 Reached end of file.

&H80070027 The disk is full.

&H80070032 The network request is not supported.

&H80070033 The remote computer is not available.

&H80070034 A duplicate name exists on the network.

&H80070035 The network path was not found.

&H80070036 The network is busy.

&H80070037 The specified network resource or device is no longer available.

&H80070038 The network BIOS command limit has been reached.

&H80070039 A network adapter hardware error occurred.

&H8007003A The specified server cannot perform the requested operation.

&H8007003B An unexpected network error occurred.

&H8007003C The remote adapter is not compatible.

&H8007003D The printer queue is full.

&H8007003E Space to store the file waiting to be printed is not available on the server.

&H8007003F Your file waiting to be printed was deleted.

&H80070040 The specified network name is no longer available.

&H80070041 Network access is denied.

&H80070042 The network resource type is not correct.

&H80070043 The network name cannot be found.

&H80070044 The name limit for the local computer network adapter card was exceeded.

&H80070045 The network BIOS session limit was exceeded.

&H80070046 The remote server has been paused or is in the process of being started.

&H80070047 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.

&H80070048 The specified printer or disk device has been paused.

&H80070050 The file exists.

&H80070052 The directory or file cannot be created.

&H80070053 Fail on INT 24

&H80070054 Storage to process this request is not available.

&H80070055 The local device name is already in use.

&H80070056 The specified network password is not correct.

&H80070057 The parameter is incorrect.

&H80070058 A write fault occurred on the network.

&H80070059 The system cannot start another process at this time.

&H80070064 Cannot create another system semaphore.

&H80070065 The exclusive semaphore is owned by another process.

&H80070066 The semaphore is set and cannot be closed.

&H80070067 The semaphore cannot be set again.

&H80070068 Cannot request exclusive semaphores at interrupt time.

&H80070069 The previous ownership of this semaphore has ended.

&H8007006A Insert the diskette for drive %1.

&H8007006B Program stopped because alternate diskette was not inserted.

&H8007006C The disk is in use or locked by another process.

&H8007006D The pipe has been ended.

&H8007006E The system cannot open the device or file specified.

&H8007006F The file name is too long.

&H80070070 There is not enough space on the disk.

&H80070071 No more internal file identifiers available.

&H80070072 The target internal file identifier is incorrect.

&H80070075 The IOCTL call made by the application program is not correct.

&H80070076 The verify-on-write switch parameter value is not correct.

&H80070077 The system does not support the command requested.

&H80070078 This function is only valid in Win32 mode.

&H80070079 The semaphore timeout period has expired.

&H8007007A The data area passed to a system call is too small.

&H8007007B The filename, directory name, or volume label syntax is incorrect.

&H8007007C The system call level is not correct.

&H8007007D The disk has no volume label.

&H8007007E The specified module could not be found.

&H8007007F The specified procedure could not be found.

&H80070080 There are no child processes to wait for.

&H80070081 The %1 application cannot be run in Win32 mode.

&H80070082 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.

&H80070083 An attempt was made to move the file pointer before the beginning of the file.

&H80070084 The file pointer cannot be set on the specified device or file.

&H80070085 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.

&H80070086 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.

&H80070087 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.

&H80070088 The system tried to delete the JOIN of a drive that is not joined.

&H80070089 The system tried to delete the substitution of a drive that is not substituted.

&H8007008A The system tried to join a drive to a directory on a joined drive.

&H8007008B The system tried to substitute a drive to a directory on a substituted drive.

&H8007008C The system tried to join a drive to a directory on a substituted drive.

&H8007008D The system tried to SUBST a drive to a directory on a joined drive.

&H8007008E The system cannot perform a JOIN or SUBST at this time.

&H8007008F The system cannot join or substitute a drive to or for a directory on the same drive.

&H80070090 The directory is not a subdirectory of the root directory.

&H80070091 The directory is not empty.

&H80070092 The path specified is being used in a substitute.

&H80070093 Not enough resources are available to process this command.

&H80070094 The path specified cannot be used at this time.

&H80070095 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.

&H80070096 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.

&H80070097 The number of specified semaphore events for DosMuxSemWait is not correct.

&H80070098 DosMuxSemWait did not execute; too many semaphores are already set.

&H80070099 The DosMuxSemWait list is not correct.

&H8007009A The volume label you entered exceeds the label character limit of the target file system.

&H8007009B Cannot create another thread.

&H8007009C The recipient process has refused the signal.

&H8007009D The segment is already discarded and cannot be locked.

&H8007009E The segment is already unlocked.

&H8007009F The address for the thread ID is not correct.

&H800700A0 The argument string passed to DosExecPgm is not correct.

&H800700A1 The specified path is invalid.

&H800700A2 A signal is already pending.

&H800700A4 No more threads can be created in the system.

&H800700A7 Unable to lock a region of a file.

&H800700AA The requested resource is in use.

&H800700AD A lock request was not outstanding for the supplied cancel region.

&H800700AE The file system does not support atomic changes to the lock type.

&H800700B4 The system detected a segment number that was not correct.

&H800700B6 The operating system cannot run %1.

&H800700B7 Cannot create a file when that file already exists.

&H800700BA The flag passed is not correct.

&H800700BB The specified system semaphore name was not found.

&H800700BC The operating system cannot run %1.

&H800700BD The operating system cannot run %1.

&H800700BE The operating system cannot run %1.

&H800700BF Cannot run %1 in Win32 mode.

&H800700C0 The operating system cannot run %1.

&H800700C1 %1 is not a valid Win32 application.

&H800700C2 The operating system cannot run %1.

&H800700C3 The operating system cannot run %1.

&H800700C4 The operating system cannot run this application program.

&H800700C5 The operating system is not presently configured to run this application.

&H800700C6 The operating system cannot run %1.

&H800700C7 The operating system cannot run this application program.

&H800700C8 The code segment cannot be greater than or equal to 64KB.

&H800700C9 The operating system cannot run %1.

&H800700CA The operating system cannot run %1.

&H800700CB The system could not find the environment option that was entered.

&H800700CD No process in the command subtree has a signal handler.

&H800700CE The filename or extension is too long.

&H800700CF The ring 2 stack is in use.

&H800700D0 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.

&H800700D1 The signal being posted is not correct.

&H800700D2 The signal handler cannot be set.

&H800700D4 The segment is locked and cannot be reallocated.

&H800700D6 Too many dynamic link modules are attached to this program or dynamic link module.

&H800700D7 Can't nest calls to LoadModule.

&H800700E6 The pipe state is invalid.

&H800700E7 All pipe instances are busy.

&H800700E8 The pipe is being closed.

&H800700E9 No process is on the other end of the pipe.

&H800700EA More data is available.

&H800700F0 The session was cancelled.

&H800700FE The specified extended attribute name was invalid.

&H800700FF The extended attributes are inconsistent.

&H80070103 No more data is available.

&H8007010A The Copy API cannot be used.

&H8007010B The directory name is invalid.

&H80070113 The extended attributes did not fit in the buffer.

&H80070114 The extended attribute file on the mounted file system is corrupt.

&H80070115 The extended attribute table file is full.

&H80070116 The specified extended attribute handle is invalid.

&H8007011A The mounted file system does not support extended attributes.

&H80070120 Attempt to release mutex not owned by caller.

&H8007012A Too many posts were made to a semaphore.

&H8007012B Only part of a Read/WriteProcessMemory request was completed.

&H8007013D The system cannot find message for message number 0x%1 in message file for %2.

&H800701E7 Attempt to access invalid address.

&H80070216 Arithmetic result exceeded 32 bits.

&H80070217 There is a process on other end of the pipe.

&H80070218 Waiting for a process to open the other end of the pipe.

&H800703E2 Access to the extended attribute was denied.

&H800703E3 The I/O operation has been aborted because of either a thread exit or an application request.

&H800703E4 Overlapped I/O event is not in a signalled state.

&H800703E5 Overlapped I/O operation is in progress.

&H800703E6 Invalid access to memory location.

&H800703E7 Error performing inpage operation.

&H800703E9 Recursion too deep, stack overflowed.

&H800703EA The window cannot act on the sent message.

&H800703EB Cannot complete this function.

&H800703EC Invalid flags.

&H800703ED The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt.

&H800703EE The volume for a file has been externally altered such that the opened file is no longer valid.

&H800703EF The requested operation cannot be performed in full-screen mode.

&H800703F0 An attempt was made to reference a token that does not exist.

&H800703F1 The configuration registry database is corrupt.

&H800703F2 The configuration registry key is invalid.

&H800703F3 The configuration registry key could not be opened.

&H800703F4 The configuration registry key could not be read.

&H800703F5 The configuration registry key could not be written.

&H800703F6 One of the files in the Registry database had to be recovered by use of a log or alternate copy. The recovery was successful.

&H800703F7 The Registry is corrupt. The structure of one of the files that contains Registry data is corrupt, or the system's image of the file in memory is corrupt, or the file could not be recovered because the alternate copy or log was absent or corrupt.

&H800703F8 An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry.

&H800703F9 The system has attempted to load or restore a file into the Registry, but the specified file is not in a Registry file format.

&H800703FA Illegal operation attempted on a Registry key which has been marked for deletion.

&H800703FB System could not allocate the required space in a Registry log.

&H800703FC Cannot create a symbolic link in a Registry key that already has subkeys or values.

&H800703FD Cannot create a stable subkey under a volatile parent key.

&H800703FE A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.

&H8007041B A stop control has been sent to a service which other running services are dependent on.

&H8007041C The requested control is not valid for this service

&H8007041D The service did not respond to the start or control request in a timely fashion.

&H8007041E A thread could not be created for the service.

&H8007041F The service database is locked.

&H80070420 An instance of the service is already running.

&H80070421 The account name is invalid or does not exist.

&H80070422 The specified service is disabled and cannot be started.

&H80070423 Circular service dependency was specified.

&H80070424 The specified service does not exist as an installed service.

&H80070425 The service cannot accept control messages at this time.

&H80070426 The service has not been started.

&H80070427 The service process could not connect to the service controller.

&H80070428 An exception occurred in the service when handling the control request.

&H80070429 The database specified does not exist.

&H8007042A The service has returned a service-specific error code.

&H8007042B The process terminated unexpectedly.

&H8007042C The dependency service or group failed to start.

&H8007042D The service did not start due to a logon failure.

&H8007042E After starting, the service hung in a start-pending state.

&H8007042F The specified service database lock is invalid.

&H80070430 The specified service has been marked for deletion.

&H80070431 The specified service already exists.

&H80070432 The system is currently running with the last-known-good configuration.

&H80070433 The dependency service does not exist or has been marked for deletion.

&H80070434 The current boot has already been accepted for use as the last-known-good control set.

&H80070435 No attempts to start the service have been made since the last boot.

&H80070436 The name is already in use as either a service name or a service display name.

&H8007044C The physical end of the tape has been reached.

&H8007044D A tape access reached a filemark.

&H8007044E Beginning of tape or partition was encountered.

&H8007044F A tape access reached the end of a set of files.

&H80070450 No more data is on the tape.

&H80070451 Tape could not be partitioned.

&H80070452 When accessing a new tape of a multivolume partition, the current blocksize is incorrect.

&H80070453 Tape partition information could not be found when loading a tape.

&H80070454 Unable to lock the media eject mechanism.

&H80070455 Unable to unload the media.

&H80070456 Media in drive may have changed.

&H80070457 The I/O bus was reset.

&H80070458 No media in drive.

&H80070459 No mapping for the Unicode character exists in the target multi-byte code page.

&H8007045A A dynamic link library (DLL) initialization routine failed.

&H8007045B A system shutdown is in progress.

&H8007045C Unable to abort the system shutdown because no shutdown was in progress.

&H8007045D The request could not be performed because of an I/O device error.

&H8007045E No serial device was successfully initialized. The serial driver will unload.

&H8007045F Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.

&H80070460 A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)

&H80070461 A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)

&H80070462 No ID address mark was found on the floppy disk.

&H80070463 Mismatch between the floppy disk sector ID field and the floppy disk controller track address.

&H80070464 The floppy disk controller reported an error that is not recognized by the floppy disk driver.

&H80070465 The floppy disk controller returned inconsistent results in its registers.

&H80070466 While accessing the hard disk, a recalibrate operation failed, even after retries.

&H80070467 While accessing the hard disk, a disk operation failed even after retries.

&H80070468 While accessing the hard disk, a disk controller reset was needed, but even that failed.

&H80070469 Physical end of tape encountered.

&H8007046A Not enough server storage is available to process this command.

&H8007046B A potential deadlock condition has been detected.

&H8007046C The base address or the file offset specified does not have the proper alignment.

&H80070474 An attempt to change the system power state was vetoed by another application or driver.

&H80070475 The system BIOS failed an attempt to change the system power state.

&H8007047E The specified program requires a newer version of Windows.

&H8007047F The specified program is not a Windows or MS-DOS program.

&H80070480 Cannot start more than one instance of the specified program.

&H80070481 The specified program was written for an older version of Windows.

&H80070482 One of the library files needed to run this application is damaged.

&H80070483 No application is associated with the specified file for this operation.

&H80070484 An error occurred in sending the command to the application.

&H80070485 One of the library files needed to run this application cannot be found.

&H800704B0 The specified device name is invalid.

&H800704B1 The device is not currently connected but it is a remembered connection.

&H800704B2 An attempt was made to remember a device that had previously been remembered.

&H800704B3 No network provider accepted the given network path.

&H800704B4 The specified network provider name is invalid.

&H800704B5 Unable to open the network connection profile.

&H800704B6 The network connection profile is corrupt.

&H800704B7 Cannot enumerate a non-container.

&H800704B8 An extended error has occurred.

&H800704B9 The format of the specified group name is invalid.

&H800704BA The format of the specified computer name is invalid.

&H800704BB The format of the specified event name is invalid.

&H800704BC The format of the specified domain name is invalid.

&H800704BD The format of the specified service name is invalid.

&H800704BE The format of the specified network name is invalid.

&H800704BF The format of the specified share name is invalid.

&H800704C0 The format of the specified password is invalid.

&H800704C1 The format of the specified message name is invalid.

&H800704C2 The format of the specified message destination is invalid.

&H800704C3 The credentials supplied conflict with an existing set of credentials.

&H800704C4 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.

&H800704C5 The workgroup or domain name is already in use by another computer on the network.

&H800704C6 The network is not present or not started.

&H800704C7 The operation was cancelled by the user.

&H800704C8 The requested operation cannot be performed on a file with a user mapped section open.

&H800704C9 The remote system refused the network connection.

&H800704CA The network connection was gracefully closed.

&H800704CB The network transport endpoint already has an address associated with it.

&H800704CC An address has not yet been associated with the network endpoint.

&H800704CD An operation was attempted on a non-existent network connection.

&H800704CE An invalid operation was attempted on an active network connection.

&H800704CF The remote network is not reachable by the transport.

&H800704D0 The remote system is not reachable by the transport.

&H800704D1 The remote system does not support the transport protocol.

&H800704D2 No service is operating at the destination network endpoint on the remote system.

&H800704D3 The request was aborted.

&H800704D4 The network connection was aborted by the local system.

&H800704D5 The operation could not be completed. A retry should be performed.

&H800704D6 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.

&H800704D7 Attempting to login during an unauthorized time of day for this account.

&H800704D8 The account is not authorized to login from this station.

&H800704D9 The network address could not be used for the operation requested.

&H800704DA The service is already registered.

&H800704DB The specified service does not exist.

&H800704DC The operation being requested was not performed because the user has not been authenticated.

&H800704DD The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.

&H800704DE Return that wants caller to continue with work in progress.

&H800704DF An attempt was made to perform an initialization operation when initialization has already been completed.

&H800704E0 No more local devices.

&H80070514 Not all privileges referenced are assigned to the caller.

&H80070515 Some mapping between account names and security IDs was not done.

&H80070516 No system quota limits are specifically set for this account.

&H80070517 No encryption key is available. A well-known encryption key was returned.

&H80070518 The NT password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.

&H80070519 The revision level is unknown.

&H8007051A Indicates two revision levels are incompatible.

&H8007051B This security ID may not be assigned as the owner of this object.

&H8007051C This security ID may not be assigned as the primary group of an object.

&H8007051D An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.

&H8007051E The group may not be disabled.

&H8007051F There are currently no logon servers available to service the logon request.

&H80070520 A specified logon session does not exist. It may already have been terminated.

&H80070521 A specified privilege does not exist.

&H80070522 A required privilege is not held by the client.

&H80070523 The name provided is not a properly formed account name.

&H80070524 The specified user already exists.

&H80070525 The specified user does not exist.

&H80070526 The specified group already exists.

&H80070527 The specified group does not exist.

&H80070528 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.

&H80070529 The specified user account is not a member of the specified group account.

&H8007052A The last remaining administration account cannot be disabled or deleted.

&H8007052B Unable to update the password. The value provided as the current password is incorrect.

&H8007052C Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.

&H8007052D Unable to update the password because a password update rule has been violated.

&H8007052E Logon failure: unknown user name or bad password.

&H8007052F Logon failure: user account restriction.

&H80070530 Logon failure: account logon time restriction violation.

&H80070531 Logon failure: user not allowed to log on to this computer.

&H80070532 Logon failure: the specified account password has expired.

&H80070533 Logon failure: account currently disabled.

&H80070534 No mapping between account names and security IDs was done.

&H80070535 Too many local user identifiers (LUIDs) were requested at one time.

&H80070536 No more local user identifiers (LUIDs) are available.

&H80070537 The subauthority part of a security ID is invalid for this particular use.

&H80070538 The access control list (ACL) structure is invalid.

&H80070539 The security ID structure is invalid.

&H8007053A The security descriptor structure is invalid.

&H8007053C The inherited access control list (ACL) or access control entry (ACE) could not be built.

&H8007053D The server is currently disabled.

&H8007053E The server is currently enabled.

&H8007053F The value provided was an invalid value for an identifier authority.

&H80070540 No more memory is available for security information updates.

&H80070541 The specified attributes are invalid, or incompatible with the attributes for the group as a whole.

&H80070542 Either a required impersonation level was not provided, or the provided impersonation level is invalid.

&H80070543 Cannot open an anonymous level security token.

&H80070544 The validation information class requested was invalid.

&H80070545 The type of the token is inappropriate for its attempted use.

&H80070546 Unable to perform a security operation on an object which has no associated security.

&H80070547 Indicates a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved.

&H80070548 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.

&H80070549 The domain was in the wrong state to perform the security operation.

&H8007054A This operation is only allowed for the Primary Domain Controller of the domain.

&H8007054B The specified domain did not exist.

&H8007054C The specified domain already exists.

&H8007054D An attempt was made to exceed the limit on the number of domains per server.

&H8007054E Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.

&H8007054F The security account database contains an internal inconsistency.

&H80070550 Generic access types were contained in an access mask which should already be mapped to non-generic types.

&H80070551 A security descriptor is not in the right format (absolute or self-relative).

&H80070552 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.

&H80070553 Cannot start a new logon session with an ID that is already in use.

&H80070554 A specified authentication package is unknown.

&H80070555 The logon session is not in a state that is consistent with the requested operation.

&H80070556 The logon session ID is already in use.

&H80070557 A logon request contained an invalid logon type value.

&H80070558 Unable to impersonate via a named pipe until data has been read from that pipe.

&H80070559 The transaction state of a Registry subtree is incompatible with the requested operation.

&H8007055A An internal security database corruption has been encountered.

&H8007055B Cannot perform this operation on built-in accounts.

&H8007055C Cannot perform this operation on this built-in special group.

&H8007055D Cannot perform this operation on this built-in special user.

&H8007055E The user cannot be removed from a group because the group is currently the user's primary group.

&H8007055F The token is already in use as a primary token.

&H80070560 The specified local group does not exist.

&H80070561 The specified account name is not a member of the local group.

&H80070562 The specified account name is already a member of the local group.

&H80070563 The specified local group already exists.

&H80070564 Logon failure: the user has not been granted the requested logon type at this computer.

&H80070565 The maximum number of secrets that may be stored in a single system has been exceeded.

&H80070566 The length of a secret exceeds the maximum length allowed.

&H80070567 The local security authority database contains an internal inconsistency.

&H80070568 During a logon attempt, the user's security context accumulated too many security IDs.

&H80070569 Logon failure: the user has not been granted the requested logon type at this computer.

&H8007056A A cross-encrypted password is necessary to change a user password.

&H8007056B A new member could not be added to a local group because the member does not exist.

&H8007056C A new member could not be added to a local group because the member has the wrong account type.

&H8007056D Too many security IDs have been specified.

&H8007056E A cross-encrypted password is necessary to change this user password.

&H8007056F Indicates an ACL contains no inheritable components

&H80070570 The file or directory is corrupt and non-readable.

&H80070571 The disk structure is corrupt and non-readable.

&H80070572 There is no user session key for the specified logon session.

&H80070573 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.

&H80070578 Invalid window handle.

&H80070579 Invalid menu handle.

&H8007057A Invalid cursor handle.

&H8007057B Invalid accelerator table handle.

&H8007057C Invalid hook handle.

&H8007057D Invalid handle to a multiple-window position structure.

&H8007057E Cannot create a top-level child window.

&H8007057F Cannot find window class.

&H80070580 Invalid window, belongs to other thread.

&H80070581 Hot key is already registered.

&H80070582 Class already exists.

&H80070583 Class does not exist.

&H80070584 Class still has open windows.

&H80070585 Invalid index.

&H80070586 Invalid icon handle.

&H80070587 Using private DIALOG window words.

&H80070588 The listbox identifier was not found.

&H80070589 No wildcards were found.

&H8007058A Thread does not have a clipboard open.

&H8007058B Hot key is not registered.

&H8007058C The window is not a valid dialog window.

&H8007058D Control ID not found.

&H8007058E Invalid message for a combo box because it does not have an edit control.

&H8007058F The window is not a combo box.

&H80070590 Height must be less than 256.

&H80070591 Invalid device context (DC) handle.

&H80070592 Invalid hook procedure type.

&H80070593 Invalid hook procedure.

&H80070594 Cannot set non-local hook without a module handle.

&H80070595 This hook procedure can only be set globally.

&H80070596 The journal hook procedure is already installed.

&H80070597 The hook procedure is not installed.

&H80070598 Invalid message for single-selection listbox.

&H80070599 LB_SETCOUNT sent to non-lazy listbox.

&H8007059A This list box does not support tab stops.

&H8007059B Cannot destroy object created by another thread.

&H8007059C Child windows cannot have menus.

&H8007059D The window does not have a system menu.

&H8007059E Invalid message box style.

&H8007059F Invalid system-wide (SPI_*) parameter.

&H800705A0 Screen already locked.

&H800705A1 All handles to windows in a multiple-window position structure must have the same parent.

&H800705A2 The window is not a child window.

&H800705A3 Invalid GW_* command.

&H800705A4 Invalid thread identifier.

&H800705A5 Cannot process a message from a window that is not a multiple document interface (MDI) window.

&H800705A6 Popup menu already active.

&H800705A7 The window does not have scroll bars.

&H800705A8 Scroll bar range cannot be greater than 0x7FFF.

&H800705A9 Cannot show or remove the window in the way specified.

&H800705AA Insufficient system resources exist to complete the requested service.

&H800705AB Insufficient system resources exist to complete the requested service.

&H800705AC Insufficient system resources exist to complete the requested service.

&H800705AD Insufficient quota to complete the requested service.

&H800705AE Insufficient quota to complete the requested service.

&H800705AF The paging file is too small for this operation to complete.

&H800705B0 A menu item was not found.

&H800705DC The event log file is corrupt.

&H800705DD No event log file could be opened, so the event logging service did not start.

&H800705DE The event log file is full.

&H800705DF The event log file has changed between reads.

&H800706A4 The string binding is invalid.

&H800706A5 The binding handle is not the correct type.

&H800706A6 The binding handle is invalid.

&H800706A7 The RPC protocol sequence is not supported.

&H800706A8 The RPC protocol sequence is invalid.

&H800706A9 The string universal unique identifier (UUID) is invalid.

&H800706AA The endpoint format is invalid.

&H800706AB The network address is invalid.

&H800706AC No endpoint was found.

&H800706AD The timeout value is invalid.

&H800706AE The object universal unique identifier (UUID) was not found.

&H800706AF The object universal unique identifier (UUID) has already been registered.

&H800706B0 The type universal unique identifier (UUID) has already been registered.

&H800706B1 The RPC server is already listening.

&H800706B2 No protocol sequences have been registered.

&H800706B3 The RPC server is not listening.

&H800706B4 The manager type is unknown.

&H800706B5 The interface is unknown.

&H800706B6 There are no bindings.

&H800706B7 There are no protocol sequences.

&H800706B8 The endpoint cannot be created.

&H800706B9 Not enough resources are available to complete this operation.

&H800706BA The RPC server is unavailable.

&H800706BB The RPC server is too busy to complete this operation.

&H800706BC The network options are invalid.

&H800706BD There is not a remote procedure call active in this thread.

&H800706BE The remote procedure call failed.

&H800706BF The remote procedure call failed and did not execute.

&H800706C0 A remote procedure call (RPC) protocol error occurred.

&H800706C2 The transfer syntax is not supported by the RPC server.

&H800706C4 The universal unique identifier (UUID) type is not supported.

&H800706C5 The tag is invalid.

&H800706C6 The array bounds are invalid.

&H800706C7 The binding does not contain an entry name.

&H800706C8 The name syntax is invalid.

&H800706C9 The name syntax is not supported.

&H800706CB No network address is available to use to construct a universal unique identifier (UUID).

&H800706CC The endpoint is a duplicate.

&H800706CD The authentication type is unknown.

&H800706CE The maximum number of calls is too small.

&H800706CF The string is too long.

&H800706D0 The RPC protocol sequence was not found.

&H800706D1 The procedure number is out of range.

&H800706D2 The binding does not contain any authentication information.

&H800706D3 The authentication service is unknown.

&H800706D4 The authentication level is unknown.

&H800706D5 The security context is invalid.

&H800706D6 The authorization service is unknown.

&H800706D7 The entry is invalid.

&H800706D8 The server endpoint cannot perform the operation.

&H800706D9 There are no more endpoints available from the endpoint mapper.

&H800706DA No interfaces have been exported.

&H800706DB The entry name is incomplete.

&H800706DC The version option is invalid.

&H800706DD There are no more members.

&H800706DE There is nothing to unexport.

&H800706DF The interface was not found.

&H800706E0 The entry already exists.

&H800706E1 The entry is not found.

&H800706E2 The name service is unavailable.

&H800706E3 The network address family is invalid.

&H800706E4 The requested operation is not supported.

&H800706E5 No security context is available to allow impersonation.

&H800706E6 An internal error occurred in a remote procedure call (RPC).

&H800706E7 The RPC server attempted an integer division by zero.

&H800706E8 An addressing error occurred in the RPC server.

&H800706E9 A floating-point operation at the RPC server caused a division by zero.

&H800706EA A floating-point underflow occurred at the RPC server.

&H800706EB A floating-point overflow occurred at the RPC server.

&H800706EC The list of RPC servers available for the binding of auto handles has been exhausted.

&H800706ED Unable to open the character translation table file.

&H800706EE The file containing the character translation table has fewer than 512 bytes.

&H800706EF A null context handle was passed from the client to the host during a remote procedure call.

&H800706F1 The context handle changed during a remote procedure call.

&H800706F2 The binding handles passed to a remote procedure call do not match.

&H800706F3 The stub is unable to get the remote procedure call handle.

&H800706F4 A null reference pointer was passed to the stub.

&H800706F5 The enumeration value is out of range.

&H800706F6 The byte count is too small.

&H800706F7 The stub received bad data.

&H800706F8 The supplied user buffer is not valid for the requested operation.

&H800706F9 The disk media is not recognized. It may not be formatted.

&H800706FA The workstation does not have a trust secret.

&H800706FB The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship.

&H800706FC The trust relationship between the primary domain and the trusted domain failed.

&H800706FD The trust relationship between this workstation and the primary domain failed.

&H800706FE The network logon failed.

&H800706FF A remote procedure call is already in progress for this thread.

&H80070700 An attempt was made to logon, but the network logon service was not started.

&H80070701 The user's account has expired.

&H80070702 The redirector is in use and cannot be unloaded.

&H80070703 The specified printer driver is already installed.

&H80070704 The specified port is unknown.

&H80070705 The printer driver is unknown.

&H80070706 The print processor is unknown.

&H80070707 The specified separator file is invalid.

&H80070708 The specified priority is invalid.

&H80070709 The printer name is invalid.

&H8007070A The printer already exists.

&H8007070B The printer command is invalid.

&H8007070C The specified datatype is invalid.

&H8007070D The Environment specified is invalid.

&H8007070E There are no more bindings.

&H8007070F The account used is an interdomain trust account. Use your global user account or local user account to access this server.

&H80070710 The account used is a Computer Account. Use your global user account or local user account to access this server.

&H80070711 The account used is an server trust account. Use your global user account or local user account to access this server.

&H80070712 The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.

&H80070713 The server is in use and cannot be unloaded.

&H80070714 The specified image file did not contain a resource section.

&H80070715 The specified resource type can not be found in the image file.

&H80070716 The specified resource name can not be found in the image file.

&H80070717 The specified resource language ID cannot be found in the image file.

&H80070718 Not enough quota is available to process this command.

&H80070719 No interfaces have been registered.

&H8007071A The server was altered while processing this call.

&H8007071B The binding handle does not contain all required information.

&H8007071C Communications failure.

&H8007071D The requested authentication level is not supported.

&H8007071E No principal name registered.

&H8007071F The error specified is not a valid Windows RPC error code.

&H80070720 A UUID that is valid only on this computer has been allocated.

&H80070721 A security package specific error occurred.

&H80070722 Thread is not cancelled.

&H80070723 Invalid operation on the encoding/decoding handle.

&H80070724 Incompatible version of the serializing package.

&H80070725 Incompatible version of the RPC stub.

&H8007076A The group member was not found.

&H8007076B The endpoint mapper database could not be created.

&H8007076C The object universal unique identifier (UUID) is the nil UUID.

&H8007076D The specified time is invalid.

&H8007076E The specified Form name is invalid.

&H8007076F The specified Form size is invalid

&H80070770 The specified Printer handle is already being waited on

&H80070771 The specified Printer has been deleted

&H80070772 The state of the Printer is invalid

&H80070773 The user must change his password before he logs on the first time.

&H80070774 Could not find the domain controller for this domain.

&H80070775 The referenced account is currently locked out and may not be logged on to.

&H800707D0 The pixel format is invalid.

&H800707D1 The specified driver is invalid.

&H800707D2 The window style or class attribute is invalid for this operation.

&H800707D3 The requested metafile operation is not supported.

&H800707D4 The requested transformation operation is not supported.

&H800707D5 The requested clipping operation is not supported.

&H8007089A The specified username is invalid.

&H800708CA This network connection does not exist.

&H80070961 This network connection has files open or requests pending.

&H80070962 Active connections still exist.

&H80070964 The device is in use by an active process and cannot be disconnected.

&H80070BB8 The specified print monitor is unknown.

&H80070BB9 The specified printer driver is currently in use.

&H80070BBA The spool file was not found.

&H80070BBB A StartDocPrinter call was not issued.

&H80070BBC An AddJob call was not issued.

&H80070BBD The specified print processor has already been installed.

&H80070BBE The specified print monitor has already been installed.

&H80070FA0 WINS encountered an error while processing the command.

&H80070FA1 The local WINS can not be deleted.

&H80070FA2 The importation from the file failed.

&H80070FA3 The backup Failed. Was a full backup done before ?

&H80070FA4 The backup Failed. Check the directory that you are backing the database to.

&H80070FA5 The name does not exist in the WINS database.

&H80070FA6 Replication with a non-configured partner is not allowed.

&H800717E6 The list of servers for this workgroup is not currently available

&H80080001 Attempt to create a class object failed

&H80080002 OLE service could not bind object

&H80080003 RPC communication failed with OLE service

&H80080004 Bad path to object

&H80080005 Server execution failed

&H80080006 OLE service could not communicate with the object server

&H80080007 Moniker path could not be normalized

&H80080008 Object server is stopping when OLE service contacts it

&H80080009 An invalid root block pointer was specified

&H80080010 An allocation chain contained an invalid link pointer

&H80080011 The requested allocation size was too large


Click Three Times