Fiberglass Hulls:

Subject	Scale	Manufacturer	Comments
Hamilton class 378' WHEC	1/96	Coast Guard Models	47 inches LOA.
Hamilton class 378' WHEC	1/96	Scale Shipyard	47 inches LOA.
Bear class 270' WMEC	1/96	Scale Shipyard	33 inches LOA.
Secretary class 327' WHEC	1/96	Scale Shipyard	41” LOA.
Polar class 399' WAGB	1/96	Scale Shipyard	Big 50” hull.
USCGC Cherokee (WMEC-165)	1/96	Scale Shipyard	25.5” LOA. Hull for ex-USN fleet tugs (Cherokee, Chilula, Tamaroa, etc.) Installation of RC gear and batteries will be tight.
USCGC Cherokee (WMEC-165)	1/48	Scale Shipyard	51” LOA. Same as above, but twice the size. Lots of room for RC gear.
49' BUSL (Buoy Utility Stern Loading)	1/12	Coast Guard Models	49" LOA
140' Bay class WTGB	1/48	Coast Guard Models	35” LOA
180' Iris class WLB	1/48	Coast Guard Models	45" LOA
175' Keeper class WLM	1/48	Coast Guard Models	44" LOA
225' Juniper class	1/48	Coast Guard Models	56" LOA
Reliance class 210' WMEC	1/48	Coast Guard Models	52" LOA
Island class 110' WPB	1/24	Coast Guard Models	55" LOA
47' MLB	1/16	Coast Guard Models
Point class 82' WPB	1/32	Microglass	31" LOA
Cape class 95' WPB	1/32	Microglass	35" LOA
44’ Motor Lifeboat	1/32	Microglass	16.5” LOA

Notes on Fiberglass hulls:

(1) These are generally finely molded hulls, molded to the main deck, with a white gelcoat finish. Builder must scratch-build the rest of the model. Many fittings (doors, fire stations, etc.) and weapons are available. Hulls are typically used as the basis for a Radio Control model.

(2) Coast Guard Models produces a variety of USCG hulls- the line is continually growing. If you’re looking for a hull not listed above- it may still be worth your time to check out their website. They also have a variety of plans available for scratchbuilders.

Back to Kit List.