Home

The table below has every playfield and other rubber for Bally's 1994 World Cup Soccer. If you order a ring kit from The Pinball Resource to replace every rubber, you'll want to order a couple additional items. The table below shows each rubber item from the ring kit and additional quantity, if needed, to order. I've highlighted the additional quantity and location for the rubber item in the color blue.

Please send any suggestions/corrections to my email.  

Thanks!

Bill

Bally World Cup Soccer Rubber Ring Location
Item Quantity Location
plunger tip 1
- shooter
flipper ring 2
- left and right flipper
3/16" rubber ring  11 + 1
- upper left of "magna-goal target" lamp insert above left out lane (metal post)
- lower left of left "light free kick" saucer (plastic green post)
- upper left of "assist" saucer (plastic green post) by goalie
- "Buy" & "Ticket" lanes at top of playfield (total of 6 - plastic green post)
- lower right of lower right jet bumper (total of 2 - plastic green posts)
- right of "corner kick target" lamp insert above right out lane (metal post)
- back right corner of left ramp (i.e. GATE 2) next to "Dangerous Play!" sticker
27/64" white mini-post rubber 8 + 5
- lower left of "magna-goal target" lamp insert by left out lane
- about 3" above "ultra spinner" lamp insert on middle left side of playfield
- lower left of "Buy" lamp insert at top of playfield
- lower right of "Ticket" lamp insert at top of playfield 
- upper left of left jet bumper
- below "magna-goal" stand up target on lower right side of playfield
- lower right of "corner kick target" lamp insert by right out lanes
- above left saucer next to looks like I've got one extra or a location is missing
- back right side of right "GATE 1" ramp (total of 5)
rubber sleeve 13 + 4
- above left saucer "light free kick"
- left of air plane tail by "TRAVEL" air plane lamp insert (2 sleeves)
- above "spots letter" stand up target, to the left of the left ramp
- above "spots letter" stand up target, to the right of the left ramp
- goal end posts (2 sleeves)
- left (2 sleeves) and right (2 sleeves) for right GATE 1 ramp
- above right saucer "light free kick" (2 sleeves)
- above "light magna-goal" stand up target on right side of playfield (2 sleeves)
- coin toss unit (total of 4 sleeves)
5/16" rubber ring 3
- rubber rings for fat green posts on left playfield plastics. One (1) on "ultra spinner" plastic and two (2) on plastic above spinner plastic.
7/16" rubber ring 1
- around two slim green posts to the left of soccer goal
3/4" rubber ring 2
- above left jet bumper
- left of "light corner kickback" lamp insert on lower left of playfield
1" rubber ring 2 + 1
- below left jet bumper
- above and right of lower right jet bumper
- lower right of "light magna-goal" stand up target on right side of playfield.
1 1/2" rubber ring 1
- not needed and replaced by 1" rubber ring for the lower right of "light magna-goal" stand up target on right side of playfield.
2" rubber ring 2
- below "assist" saucer by goalie (double rings)
2 1/2" rubber ring 2
- left sling shot
- right sling shot
3" rubber ring 1 + 1
- lower left of goalie next to orange/yellow lightning bolt. the slim green posts take just one ring
- same location, but add a second ring to prevent the ball from getting underneath and behind the rings.