|
Here is a little information on R4R.
All Pit-Trays, Insert Trays, Display Cases and Pick-up Shoe Sanders are hand
made by me. All the sides and dividers are solid wood, no cheap plywood, laminates, or fiberboard in my products.
The Pit-Tray bottoms are high quality birch plywood. The Pit-Trays and Display Cases are made much like an expensive
Jewelry Box. Every joint is glued, I don't use a single nail, tack, staple or screw, as no respectable cabinet or box
maker would. Also not a single Butt Joint, I use a combination of Rabbet and Dados joints through out
each piece. All products are finished with a Watco Oil finish, with a minimum of 3 coats, and are wet, oil sanded for
a very smooth finish.
|
|
History
Racer for Racer (R4R) has been
building Slot Car products since 2005 after others wanted custom built Pit-Trays once I showed up at local T-Jet races with a
Pit-Tray built for my use. I build my 1st multi-layer box over 35 years ago, and I still am using it.
|
 |
|
|
|
|
|
Philosophy
Quality is important to R4R. R4R emphasizes quality throughout each step of the production process. In
the end, R4R's goal is to produce the product you want and need.
Here is my first Pit-Tray built in late 2004. Once guys saw it, the orders started.
Features: Removable Car section, Sander/Warm-up box, and Tool Block.
|
|
|
|
|
|
