F2D07
3/25/05

New Gotcha F2D.  All foam wing for more stability and strength
The covering stays on when the wing gets hit!
48 in. span  455 sq.in.  260 gr. airframe.

Laminated and glassed motor block.  The motor mount bearing area is laminated with heavy glass to prevent splitting and stand up to heat and vibration.  The block is 1.04 in. high.  The motor mounts(not included) can be shimmed to accomodate wider motors or different mounts.

Composite boom uses a separate, plug-in boom mount.  The boom can be glued(recommended) in place, or bolted make adjusting the length for trim easy. The stab has a tapered, low-speed airfoil for improved lift and controllability.

Strategic reinforcing with SLC covering, fiberglass, carbon fiber, and plywood

Almost -Ready-to-Fly  just install the bellcrank, pushrod and boom.

Internal controls direct to bellcrank.  The direct controls eliminate several grams of weight in the left hand wing, allowing less wing tip weight to be used.  They also eliminate the drag of line clips and tubing hanging on the left wing.

Introductory Pricing- One(1) $95  Two(2) $150  Ten(10) $600
plus shipping.  If you want a couple planes to try out the order can be applied to a later order for 10 or more.

Replacement Parts:
Solid Wing Cores   QuadBox(4 sets)  $40
Hollow Wing Cores(standard)  Quad box(4 sets)  $60
Motor Block/Boom assembly    $30
Motor Block- wood only            $5
Tail Boom                                     $15
Stripped Kit(No hardware)           $35.95
Quad Kit(4 in a box)                     $112