My objective here is to add detailed part descriptions and test procedures of the older Tecumseh Solid State Ignitions. I have almost done as much as I can with the configurations that I have and need additional parts to go further. In general I can use non- serviceable parts for destructive investigations and possibly for pieces. I also need some serviceable parts to test and return if desired. With the parts, it would help to identify the engine model number they came off of.The parts I need are:

1. The bearing cover which mounts the stator, Bearing Cover, 32577. (Needed to replace the one I have on loan.)

2.Plate Assy.,Stator pn 610965. Shown to the left above.

3.Coil Assy, Alternator pn 610902, (Stator 10 or 20 Amp ??) I need both 10 Amp and 20 Amp configurations. I don't know enough yet to tell them or there flywheels apart.

5. Newer Solid State Ignition, pn 610906, non- serviceable